The lower block is shot how much will it cost from a junk yard and what do you think i should do

I think the dealer or a junk yard would be your only real options. The auto salvage (junk yard) will be considerably cheaper than the dealer, if you can find a usable part. You could also cross your fingers and try Ebay.

Call junk yard and see how much it is and go from there.the labor cost shouldn't be more than 600.00 dollars

About $550 dollars by having the Dodge dealer mechanics do the work. I myself would go the the nearest car junk yard (called U-Pull It in my city.) I would switch one similar make/model/year from junk yard that cost me only $10 buck.

2 places you can buy this
dealer which is high price or junk yard
take a little time call california junk yards as you will get a better price
rockauto will have them at a great price

You can try a junk yard, auto parts store (maybe) or the dealer. One of the 3 will be able to source it - withe the junk yard probably having the right part for the east money - auto parts store may have some thing that fits - is new - and cost about the same or more than the junk yard. The dealer will have it or be able to get it - new - and the most costly of all.

You might want to locate the part from a junk yard.You can try online parts stores too.

sounds like its shot.try a junk yard might pick up a good used one

Junk yard will be the cheapest.

I don't think you'll be able to get it through an auto part store because most of these parts are not universally designed. All manufacturers make slight variations so it's hard to find an exact part.

The dealership will definitely have this part, but the price may or may not be pricey.

you should call junk yards to try to find an exact rim, cause if your rim is say 5 lug holes well other 5 lug rims may and may not fit cause the spacing on the lugs can be off by a millimeter or a 16th of an inch, your best shot will be to call a junk yard tell them you are looking for a rim for a 2001 mitsu, and they will tell you if they have one, if not most yards can get it from other places for you, or even better look on Ebay. if you dont find anything then your only other option will be to call a mitsu dealership and order one thru the parts dept.... try the junk yards first tho cause you can get it cheaper that way... the dealership will cost you a lot of money.... hope this helps you

You can buy one from a local dealer or you can buy from a junk yard near your area should cost about $40.00 at a junk yard and about $100.00 from the dealer, however I doubt that the fuse block itself is bad most likely the wiring near it or inside it is bad. Very seldom do the fuse blocks go out.