SOURCE: kia sedona 2002 error code P0118
P0118- (ETC) Engine Coolant Tempature sending unit, high input. Your ETC is either faulty or has a poor wiring problem. Thank you for using fixya.com
SOURCE: getting the error code P0442 with a ODB2 on 2004 Caravan
Code 442 indicates a vapor leak in the EVAP control system. Fuel vapors are routed through hoses to the EVAP charcoal canister, then via purge control valve, are rerouted through intake when engine running. Bad gas cap seal is the usual culprit, which you can try cleaning the seal & filler neck where it screws in, then erase codes & try again & see if it comes back, or may require new gas cap. Other areas to look is at hoses running to & from canister & purge valve for any crack that may be a source of leak.
SOURCE: Got error codes P0440, P0440 (pd), and P0442 which
It is probably a sensor that goes by the gas tank. I belive it is called a Fuel Vent Sensor Circuit. That should fix the problem.
SOURCE: my code for my 2000 hyundai accent is: P0442 Evap
may have a leaky vacuum line somewhere. The rubber seal on the gas cap could be cracked or worn out. they are easily replaced.
SOURCE: I am getting Code p0442 Evap Emission system leak
these are hard to diagnose. First trace evap hose from fuel tank to evap cannister. Check for cracks in hose or loose connections. Check out cannister for cracks. Also check hose from cannister to intake manifold. If hoses are good, it may be leaky purge valve. Hope this helps.
A code P0442 most likely means one or more of the following has happened:
821 views
Usually answered in minutes!
×