2004 Toyota Camry altiseflat battery key doesn't fit lock so need exterior bonnet release where is it

SOURCE: Locked out of car

I took my 99 Laguna to my local mechanic with a stuck bonnet. He pulled the lever from inside and told me to press down on the bonnet at the same time then open the bonnet as normal with the outside catch. It worked ok. After doing it oil the catch mechanism and it now works ok-but best to keep trying it to stop it seizing again.

SOURCE: To remove the interior door panel of a 1996 Toyota camry so that

My 96 Camry LE has 9 attachments that are visible. Some have plastic caps covering the screws; others do not. There are screws at the door handle, at the forward portion(with covers) when the door is open and the back edge (small covers). As I recall, there are several friction type fasteners around the perimiter of the panel that can be removed by prying carefully away from the metal portion of the door to free up the trim panel. Once these are loose, the trim around the inside door release handle (the one you pull to open the door) can be pryed in a backward motion. Then the entire panel can be removed by pulling upward and backward at the same time (it easier to do this with the window down). Then it is a matter of disconnecting the wires attached to the various controls for the electric windows and door locks to free up the panel itself. There is probably a plastic skin covering the metal portion of the door. Carefully pull that away to expose the inner workings of the door latch mechanisim. The rest of the procedure should become easy to figure out. I have not removed the exterior door handle itself; but it is a simple mechanism as I recall. Best of luck to you.
Timmy P.

SOURCE: Need to reprogram door locks for 2004 Toyota Camry

I recently replaced the battery on my 2004 Toyota Camry. When I installed new battery the door locks will not stay unlocked once opened with remote. How do I reprogram?

SOURCE: Bonnet cable snapped, need advice on how to open bonnet

hmm u mite have to grab the rest of the cable if any left in the catch part of the lock under the bonnet and pull it with pliers.failing that get a screw driver and see if u can push the catch to release the bonnet through the grill.failling that undo the lock through the grill with a rachet usually 10mm socket hope this helps..

SOURCE: Need instructios to repair 1997 Toyota Camry Broken Exterior Door Handle

Two 10mm bolts, or nuts, hold the handle on from inside the door. dont forget to remove actuating rod from old handle. probably clip is broke also.