2002 Chevrolet Monte Carlo Logo

Related Topics:

02 Monte Carlo 3.4 engine wiring will it fit a 3.1 sfi engine and what needs to be changed

5 Related Answers

Denis Aube

  • 142 Answers
  • Posted on Aug 12, 2008

SOURCE: when do i change the transmission fluid 2005 monte carlo?

Well, I'm not really sure what the manufacturer's recommended interval is... But to be honest with you, once every 100000 kms, or 5-6 years is plenty for a transmission fluid/filter change is enough (yes, there is a filter inside the pan of the transmission, assuming it's an automatic). But, if you notice problems earlier (transmission starting to slip, fluid discoloration, or any other transmission related driveability issues) the first thing to do would be to do a transmission oil/filter change as soon as you can. Beware of these places that offer a transmission flush, that's about as useful as putting winter air in your tires, and costs money for nothing.

Ad

Anonymous

  • 422 Answers
  • Posted on Aug 28, 2008

SOURCE: 02 monte carlo- EVAP code.

hi there, you see todays cars are so emmision friendly that not even the vapors from your tank can be released into the atmosphere so what they have done is all your vapors are put into a charcoal canister to absorb the vapors and the next time you start the car it has a purge solenoid open and burn the vapors off. if you look around the intake youll see a hose with a green cap follow it back to the charcoal canister and while your doing that just check the hoses and the hoses around the canister to make sure there is no holes or cracks in them and then follow the hose from the canister to the gas tank. if every thing looks good then i would replace the purge solenoid.

Anonymous

  • 41 Answers
  • Posted on Apr 25, 2009

SOURCE: multiple misfire 95 monte carlo 3.1 liter

check codes first. But sounds like crank position sensor mine does it all the time

Anonymous

  • 186 Answers
  • Posted on Aug 02, 2009

SOURCE: can you find an engine diagram for an 02 chevy

That is the water pump bypass/heater hoses you have to get them from the dealer, they know the ones. They are plastic and you should replace both and make sure you get all the pieces out as they will break when removed.

Anonymous

  • 226 Answers
  • Posted on Feb 04, 2010

SOURCE: My 03 monte carlo is very sluggish. The engine

P0404 Exhaust Gas Recirculation Circuit Range/Performance
P0502 Vehicle Speed Sensor Low Input
P0440 Evaporative Emission Control System Malfunction
hope that helps /a little beyond my expertise but theres your codes your looking for ;)

Ad

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

3helpful
3answers

Will the motor out of 95 monte carlo ls replace the motor in a 97 z34?

You would need way more than Steven said. So no. Don't use it.
0helpful
1answer

02 monte carlo ss engine fan want start

There are three relays and two fuses that power the radiator fans.
The computer grounds the relays to make the fans come on.
Have you checked the fuses and relays for power ?
0helpful
1answer

Oil gauge on a 02 monte carlo ss when the engine is started up the oil gauge goes from L to H & when i idela thje engine it stays on HIGH /

Have your mechanic check the oil pressere with a scanner or a manual gauge if pressure is different from gauge it needs a sender or the gauge needs replaced
0helpful
1answer

Oil gauge on 02 monte carlo ss

Sounds like the oil pressure sending unit is bad.
0helpful
1answer

How remove front seats from 02 monte carlo ss ?

Remove the plastic trim over the front and rear seat rails and you will see two bolts in the front and two in the rear, reach under the seat, disconnect the wiring to the seat and then remove front and rear bolts and careful pull seat out through the door opening, it is a tight fit don't damage anything, take your time.
0helpful
1answer

I cant find my wire for my 02 sensor for my 85 monte carlo

should be located in right or left exhaust manifold(s). most have 1 wire,some have 2 wires. wiring is routed up into engine underhood harness.
2helpful
1answer

NEED SPARK PLUG WIRE DIAGRAM FOR 98 MONTE CARLO

Check this diagrams for each engine size...

1998 Chevrolet Monte Carlo 3.1 liter V-6 VIN "M"

zjlimited_530.gif


1998 Chevrolet Monte Carlo 3.8 liter V-6 VIN "K"

zjlimited_531.gif


Hope this helps, and remember ask for additional details.
3helpful
1answer
2helpful
1answer

I need a diagram for the plug wires for a 97

diagram? or firing order? looking a engine from passenger fender, the cylinders on your right are 1-3-5, on your right are 2-4-6. Does this help?
Not finding what you are looking for?

137 views

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

john h

Level 3 Expert

29494 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

15088 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...