Question about Cars & Trucks

1 Answer

Is my crank sensor faulty, symptoms of a faulty crank sensor 2000 Rodio 3.2 L

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Top Expert:

    An expert who has finished #1 on the weekly Top 10 Fixya Experts Leaderboard.

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

  • Cars & Trucks Master
  • 29,709 Answers

Intermittent stalling. Another symptom commonly associated with a problematic crankshaft position sensor is intermittent stalling. If the crankshaft position sensor or its wiring have any issues, it can cause the crankshaft signal to be cut off while the engine is running, which can cause the engine to stall.

Symptoms of a Bad Crankshaft Sensor ' DoItYourself.com

www.doityourself.com/stry/symptoms-of-a-bad-crankshaft-sensor
This makes it an important part of your engine system; a bad crankshaft sensor affects not only the engine speed but also the fuel efficiency of your car.

7 Crankshaft Position Sensor Failure Symptoms ' DoItYourself.com

www.doityourself.com/stry/7-crankshaft-position-sensor-failure-symptoms 1 - Check Engine Light. This can be frustrating as the check engine light can obviously turn on for many different things. 2 - Cylinder Misfiring. 3 - Acceleration Hesitation. 4 - Intermittent Starting. 5 - Engine Vibrations. 6 - Backfiring and Stalling. 7 - Irregular Car Function.

Warning Signs of a Bad Crankshaft Position Sensor ' DoItYourself.com

www.doityourself.com/stry/warning-signs-of-a-bad-crankshaft-position-sensor Ignoring the symptoms of a bad crankshaft position sensor will result in rapid wear and tear of the various parts of the engine and will quickly lead to engine ...

Symptoms of a Bad or Failing Crankshaft Position Sensor ...

https://www.yourmechanic.com/.../symptoms-of-a-bad-or-failing-crankshaft-position-... Jan 6, 2016 - Intermittent stalling. Another symptom commonly associated with a problematic crankshaft position sensor is intermittent stalling. If the crankshaft position sensor or its wiring have any issues, it can cause the crankshaft signal to be cut off while the engine is running, which can cause the engine to stall. ‎Crankshaft sensor · ‎Car is stalling Inspection · ‎How Long Does a Crankshaft ...

Symptoms of a Bad Crankshaft Sensor - Buy Auto Parts

www.buyautoparts.com/howto/symptoms-of-a-bad-crankshaft-sensor.htm Problems you will run into when your crankshaft position sensor has gone bad.

symptoms of faulty crank sensor Google Search

Posted on Sep 22, 2017

Ad

2 Suggested Answers

6ya6ya

6ya staff

  • 2 Answers

SOURCE:

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Ad
co7196

Ned C Cook

  • 3433 Answers

SOURCE: Where is the crank shaft positioning sensor

Look at the area around the crankshaft pulley. It's bolted to the block and senses the crank position. If it fails, You won't have an ignition spark. Good Luck, Ned

Posted on Aug 27, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How 2 fix 00 Volvo crank but won't start


You should try going to this web site to view how to replace your crank sensor. https://www.youtube.com/watch?v=mhNawwOORiM

You can skip the ad you will see by clicking the Skip Ad button after 3 seconds. Be patient and they explain symptoms and how to replace the sensor which you can get at almost any auto parts store.

May 01, 2015 | Volvo S80 Cars & Trucks

2 Answers

If a2000 s430 crankshaft position sensor goes bad what are the symptoms? and is no cranking a cps problem


I'm thinking a problem with the battery and/or connections . Have the battery load tested for a dead cell . If the battery or terminals are bad there will be no power to let you get the key out and there will be no cranking noise either . A faulty CPS will allow the engine to crank but not fire

May 22, 2014 | 2000 Mercedes-Benz S-Class

1 Answer

Code p0017p0300


P0017 Crankshaft Position - Camshaft Position Correlation (Bank 1 Sensor B)

Symptoms of a P0017 will or may include: Malfunction Indicator Lamp (MIL) illumination The engine may run but with reduced performance The engine may crank but not start The engine may exhibit a rattle near the harmonic balancer indicating the tone ring is damaged The engine may start and run, but poorly Causes Causes may include: Timing chain stretched, or timing belt skipped a tooth due to wear Misalignment of timing belt/chain Tone ring on crankshaft slipped/broken Tone ring on camshaft slipped/broken Bad crank sensor Bad cam sensor Damaged wiring to crank/cam sensor Timing belt/chain tensioner damaged An improperly torqued crankshaft balancer A mis-built or mis-timed engine A loose or missing crankshaft balancer bolt The CMP actuator solenoid stuck open The CMP actuator stuck in a position other than 0 degrees

P0300 Random/Multiple Cylinder Misfire Detected

Symptoms may include: the engine may be harder to start the engine may stumble / stumble, and/or hesitate other symptoms may also be present Causes A code P0300 may mean that one or more of the following has happened: Faulty spark plugs or wires Faulty coil (pack) Faulty oxygen sensor(s) Faulty fuel injector(s) Burned exhaust valve Faulty catalytic converter(s) Stuck/blocked EGR valve / passages Faulty camshaft position sensor Defective computer

Oct 15, 2013 | GMC Envoy Cars & Trucks

1 Answer

Symptom of bad crankshaft sensor on 2000 yukon denali


A crank sensor will usually fail and set a trouble code in the computer.
Once the engine starts the ignition gets a signal from the cam sensor and uses the crank sensor as a reference point.
If the crank sensor fails it generally keeps the engine from starting.

Jan 17, 2013 | 1999 Oldsmobile Intrigue

1 Answer

Could a bad camshaft position sensor 2000 nissan pathfinder make you lose power while driving and engine crank over but no sart


Improve the FixYa experience for everyone by voting. I want you to let me know if the solution(s) suggested were of any value. Constructive criticism is welcomed.

Hi,

I'm Ben and -- hopefully -- I can provide some meaningful assistance.

YES


On 2 wire Sensor engines, the distributor stator or Camshaft Position (CMP) sensor is a single Hall effect magnetic switch. This is activated by a single vane, and is driven by the camshaft.

On Three Wire Sensor engines, the Camshaft Position (CMP) sensor is a variable reluctance sensor, which is triggered by the high-point mark on one of the camshaft sprockets.

The Distributor engine does not use a separate CMP sensor. It utilizes a conventional distributor, equipped with a Hall effect device, for this function.

The following symptoms can be caused by intermittent wiring connections or faulty signal to the EMS.
Related Symptoms

  • Extended crank time with a cold engine
  • Intermittent rough running
  • Unstable idle
  • Bucking
  • Hesitation
  • Stumble
  • Chuggle
  • Poor fuel economy
  • Stalling on acceleration

Jun 03, 2012 | 2000 Nissan Pathfinder

1 Answer

2240 code on honda accord 2000


P2240 HONDA - Front Air/Fuel Ratio Sensor Bank 2 Sensor 1 IP Line High Voltage.
Symptoms - Engine Light ON (or Service Engine Soon Warning Light)
- High Fuel Consumption
- Excessive Smoke from Exhaust Possible causes - Air/Fuel Ratio Sensor Bank 2 harness is open or shorted
- Air/Fuel Ratio Sensor Bank 2 circuit poor electrical connection
- Faulty Air/Fuel Ratio Sensor Bank 2
- Inappropriate fuel pressure
- Faulty fuel injectors
- Intake air leaks may be faulty
- Exhaust gas leaks

Jan 23, 2012 | 2000 Honda Accord

2 Answers

JETTA 3 2.0 CLI 1993. My car just cuts out while i'm driving sometimes it comes to a complete stand still and starts again after a few seconds most of the time it cuts out then go as i'm driving not...


Check your engine grounds (bundles of brown wires usually attached at firewall and other points around engine compartment) if these are corroded you will get same symptoms. Make notes when it occurs - IE: when wet out, damp, cold etc... My suspicions are grounds are corroded.

Feb 21, 2011 | 1996 Volkswagen Jetta

1 Answer

Exsseved cranking to start motor 2-3 seconds then starts


Crank sensor is going out, I have a 2000 Intrigue and that is classic symptoms, it will eventually not start. Not that difficult to change.

Dec 28, 2010 | 2000 Oldsmobile Intrigue

1 Answer

Car stalls unless gas constantly supplied otherwise car dies all dash lights come on usually on start up


Inspect and clean IAC valve (idle air control valve), replace if necessary. If IAC is Ok, please provide additional info!! Does your vehicle experience random or repeated hard starts?? Is your "service engine soon" light on?? These vehicles are known for faulty crank position sensor, usual symptoms are: hard starts, random/constant stalls, SES light on, misfire or no start. Some or all symptoms may or may not occur simultaneously.

Oct 11, 2010 | 2000 Oldsmobile Intrigue

1 Answer

P1281 on a 2000 dodge 3500 van I have replaced the fuel pump crank sensor plugs wires cap rotor running out of $$$$ fast


My resources say P1281 is engine is cold too long. That would lead me to possibilty of faulty thermostat, or something else in cooling system. What exactly are you getting for symptoms? No start, poor starting, poor running, ?

Nov 28, 2009 | 2000 Dodge Ram 3500

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

196 people viewed this question

Ask a Question

Usually answered in minutes!

Top Cars & Trucks Experts

Marvin
Marvin

Level 3 Expert

85216 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22485 Answers

john h

Level 3 Expert

22486 Answers

Are you a Car and Truck Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...