Cars & Trucks Logo

Related Topics:

m
marlene doescher Posted on Sep 18, 2017

Where is the radiator drainplug in the 2004 chrysler concorde? I am losing fluid from there and would like to know if this is a stop plug or something else.

5 Related Answers

Anonymous

  • 16 Answers
  • Posted on Dec 06, 2008

SOURCE: how to replace a radiator in a chrysler concorde 1998 3.2

Disconnect negative battery cable.
Drain cooling system.
Disconnect upper radiator hose.
Remove upper radiator closure panels.
Disconnect electrical connectors from electric fans.
Remove all mounting bolts for electric fans then remove from vehicle.
Raise vehicle. (You might not have to, but its easier)
Remove lower splash shield.
Disconnect lower radiator hose.
Remove lower condenser mounting bolts.
Lower vehicle.
Now back to the top.
Remove upper radiator mounting brackets and bolts.
Remove upper condenser bolts.
Now separate condenser from radiator.
Tilt radiator toward the engine and remove it from the vehicle.

Hope this helps





Ad

Anonymous

  • 337 Answers
  • Posted on Dec 07, 2008

SOURCE: Location of Radiator Drain Plug on a 1997 Honda Passport

http://www.autozone.com/shopping/repairGuide.htm?pageId=0900c15280021491

Anonymous

  • 323 Answers
  • Posted on May 07, 2009

SOURCE: Chrysler Concorde LXI 4 door - 2004 The car starts up and seconds after, the RPM drops and the car shuts off. The code P0513 comes up on the computer.

That is a code for an invalid skim key. If you have another skim key try it. If it does the same thing then the skim module may be bad.

john zajac

  • 58 Answers
  • Posted on Mar 21, 2010

SOURCE: Life expectancy of Chrysler 2.7L engine (2004)

look up the price of the car on kelly blue book, i would not get the car if you are planing on driving long distances with it anything could go wrong with the drivetrain with that kind of milage

alicantecoli

Colin Stickland

  • 22516 Answers
  • Posted on Mar 25, 2010

SOURCE: Where is the transmission fluid drain plug?

it doesnt have one

Ad

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

0helpful
1answer

How to replace radiator on a 2004 chrysler concord 3.5 engine

Remove the 10mm bolts from the fan blade & remove it. Now you have room to work. Next drain the radiator & disconnect hoses. The small bottom ones are the transmission cooler hoses, plug them. Next remove the 2 top retainer brackets. You should now be able to pull it out.
0helpful
3answers

How do I get the drain cock to stop leaking on my 94 Chrysler LHS radiator?

Sounds like its broken is the drain missing o ring? Or plastic bits?
0helpful
1answer

Need to add coolant to radiator 2001 chrysler concorde

Adding to the reservoir is fine; it works to regulate the amount of coolant in the total system. When there is excessive coolant (or heat when you have a problem) the excess is purged into the reservoir. Likewise, when the engine/radiator cools down, coolant is sucked back into the radiator. (Hot fluids expand, cool contracts, and thus a vacum is created).
You are addressing the wrong problem, here. Taking the keys away was a good first step. You need to also stop driving the car. Coolant loss is a potentially serious problem, not to mention a pollution issue. Get the car to a mechanic and find the source of the leak now. You can't band-aid this. Maybe it's just a hose, but it could be a radiator. No matter what, leaks don't heal up, they only get worse until some thing fails catastrophically. Lose your cooling = lose your engine. GET IT REPAIRED before it relly costs you.
0helpful
1answer

Where is the place to fill my brake fluid on my 1995 Chrysler conncorde

master brake is on drivers side on the fire wall, there is were you will find to fill it
0helpful
1answer

Drainplug 4 radiator 1999 chrysler sebring

The drain plug is located on the passenger's side of the radiator, all the way at the bottom of the face towards the motor. There is a small 1/4" hose connected just beneath it.

Thanks!!
EJ Kudelka
0helpful
1answer

I need to remove my power steering pump on a 2004 concord.

So you have done all this so far?

  1. Disconnect and isolate battery negative cable from battery post.
  2. Siphon power steering fluid from pump reservoir.
  3. Remove air cleaner housing and inlet tube to throttle body.
  4. Remove serpentine drive belt.
  5. Remove hose clamp, then supply hose from pump.
  6. Unthread tube nut, then remove pressure hose from pump.
  7. Remove three pump mounting bolts through access holes in pulley.
  8. Remove pump from engine bracket.
  9. If pulley needs removal
1helpful
1answer

1998 Chrysler Concorde LXI with 174K miles. 2

Problem with this is that it could be a number of things, have ur water pump checked, open the radiator and see if there is water running through it, a bad or plugged thermostat, in this case it does sound like a blown head gasket. id suggest flushing the radiator with some cleaner that u can buy at the store and check n see if ur thermostat is stuck, hope for the best and expect the worst
0helpful
1answer

I need to figure out how to drain the radiator fluid on my 2001 Chrysler Concorde?

Raise the vehicle. Locate the drain valve on the engine side of the radiator on the bottom tank on the driverside. The valve will look kinda like a butterfly wings together. Turn it counter clock wise and it will start to drain.
Not finding what you are looking for?

54 views

Ask a Question

Usually answered in minutes!

Top Chrysler Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Ronny Bennett Sr.
Ronny Bennett Sr.

Level 3 Expert

6988 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

15088 Answers

Are you a Chrysler Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...