Hi. Thanks for your question. For fremoving rear door panal on proton you can visit https://www.reliable-store.com and download the entire workshop manual which includes all the information along with the diagrams for better understanding. Good day!
SOURCE: how to remove rear door panal for 03 cts
If you have power windows start by disconnecting your negative battery cable. Then you need to locate and remove the screws that hold your interior door handles in place (they may be hidden by snap in, or snap on clips). Once you remove the screws that hold the door handles, remove any wire connectors to the handles, if they're not power you will need a small hook (kinda like a knitting needle) to remove the window crank. A manual window crank is held in place by a clip on the base. Slide the hook behind the base and remove the clip. The door panel itself, is held on by snap in clips, and you will need a small pry bar to pull them from the door (try to get as close to, or directly under the clips to prevent them from tearing out of the door panel). Once the clips are removed from the door, pull the panel upward to remove it from the door.
Install in reverse.
I hope this helps you, and I wish you luck on your repair.
We do not have this make in the US market so have no info on it. Sorry.
SOURCE: automatic transmission for proton gen 2
It is totally electronically shifted gearbox, so yes it can be scanned for fault codes.
SOURCE: Where can I get a workshop manual for 2006 proton gen 2
google you may be able to down load a pdf for a fee, if
you can't find it free from the MFg or distributor.
run the fault codes
best place to start to determine a problem
396 views
Usually answered in minutes!
×