Question about 2001 GMC Yukon Denali

Open Question

Four wheel drive on 2001 Yukon Denali seems like it is in four wheel drive a little but it says it is in 2 wheel drive

Posted by on

Ad

5 Suggested Answers

Anonymous

SOURCE:

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Ad

Anonymous

  • 36 Answers

SOURCE: 4-wheel drive

SWITCH IS BAD, A KNOWN PROBLEM WITH THEM AND I HAD ONE AND IT DID THE SAME THING TO ME, THE PUSH BUTTON 4WD SWITCH IS BAD

Posted on Jul 24, 2009

Ad

rodmaxypad

  • 30 Answers

SOURCE: Will not go into four wheel drive when I push the

I would venture the guess that your button is broken. The easy fix it to remove it and jimmy rig something manual to activate the function. Then everything will work fine. Additionally, be careful not to let your contraption rub against the actuator under the dash in that area because it could spark while you drive.

Posted on Sep 01, 2010

wyet_helps

wyet

  • 510 Answers

SOURCE: I can't Desactived the four

{: ) If your vehicle has an AWD (All-Wheel Drive) feature, engine power is sent to all 4 wheels all the time. This is like four-wheel drive, but there is no separate lever or switch to engage or disengage the front axle. It is fully automatic, and adjusts ityself as needed for road conditions.

Posted on Jun 16, 2011

kirtec auto

  • 1348 Answers

SOURCE: what makes the four wheel drive light come on in my 2001 gmc yukon

there is an electric motor driving the actuator on the transfer case.if it sticks the 4 wheel drive will not engage and the light will not come on. tapping on the actuator lightly with a plastic hammer sometimes will get it to work again.some have vacuum lines as well and those lines have to be checked that there is vacuum

Posted on Mar 10, 2012

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I can't Desactived the four wheel drive where is the switch for the four wheel drive, is a GMC YUKON DENALI 2007


{: ) If your vehicle has an AWD (All-Wheel Drive) feature, engine power is sent to all 4 wheels all the time. This is like four-wheel drive, but there is no separate lever or switch to engage or disengage the front axle. It is fully automatic, and adjusts ityself as needed for road conditions.

Jan 07, 2011 | 2007 GMC Yukon Denali

1 Answer

I have a used '95 Yukon that I just bought....It has the push buttons for Four Wheel drive........How do I tell if it is in one of the four-wheel modes?


the buttons to the right are the ones to put it in fourwheele drive the top is for four high and the botttom is for four low

Nov 23, 2010 | 1995 GMC Yukon

1 Answer

Will not go into four wheel drive when I push the button no light comes on. 2000 gmc yukon denali


I would venture the guess that your button is broken. The easy fix it to remove it and jimmy rig something manual to activate the function. Then everything will work fine. Additionally, be careful not to let your contraption rub against the actuator under the dash in that area because it could spark while you drive.

Sep 01, 2010 | 2000 GMC Yukon Denali

2 Answers

After driving for 30 minutes or more or 25 miles,


Is this an all-wheel drive or 4 wheel drive. If it is it sound like you have the vehicle in 4 wheel drive.

May 22, 2010 | 2001 GMC Yukon Denali

1 Answer

I have a 2001 GMC Yukon that will not shift into four wheel drive. I can hear the click, when I push the button and the light blinks but it will not remain solid and I dont think I should drive it without...


it sounds to me like the motor that switches the transfer case into 4 wheel drive DO NOT try to put it in 4 wheel. There should be no problem driving it as it is but if you continue to try it may get stuck in between and cause major problems

Feb 05, 2010 | 2001 GMC Yukon XL

1 Answer

4-wheel drive


SWITCH IS BAD, A KNOWN PROBLEM WITH THEM AND I HAD ONE AND IT DID THE SAME THING TO ME, THE PUSH BUTTON 4WD SWITCH IS BAD

Jul 24, 2009 | 2001 GMC Yukon XL

2 Answers

Stability control engaged and my traction contol comes on at intersections for 4-6 seconds , the power drops, causes a panic in the intersection. Dealership says their are no codes in the denali to support...


vibration would have loosened the solder joint on one of the main two leads into the ABS pump on the ABS module.checkout and replace the defective solder, the stability control will work again.

Nov 27, 2008 | 2006 GMC Yukon Xl Denali

1 Answer

2001 gmc yukon


This means there is a fault in the four wheel drive system, the light reset's each time the key is turned off, then it tests itself after the engine is started, if the fault occurs again the light will come back on.

Oct 23, 2008 | 2001 GMC Yukon

3 Answers

2002-2006 Denali front bumper fit on a 2001-2006 Yukon


Yup - you may need to get the grilles and such as well...

May 18, 2008 | 2001 GMC Denali

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

42 people viewed this question

Ask a Question

Usually answered in minutes!

Top GMC Experts

Marvin
Marvin

Level 3 Expert

85223 Answers

Jonah Oneal

Level 3 Expert

14092 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22485 Answers

Are you a GMC Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...