SOURCE: How to change the serpentine belt on '98 Plymouth Breeze?
All you need is a long prubar (or you can rent a tensioner wrench at the parts store) essentially a open end wrench with a 3 ft handle.
Put the tensioner wrench on the nub of the tensioner and pull back... this will release the tension on the old belt. Remove it from one of the pulleys, and then from the entire system.
Note how it is routed through the pulleys, and put the new one on the same way.
The car should have a sticker on the radiator support telling you the path of the belt.
SOURCE: will not start
Open the air filter container. Spray some starting fluid in and see if it starts. If it starts, it is the fuel filter or fuel pump or both.
SOURCE: oil leak 1998 plymouth breeze
First check your PCV system and make sure it is in good working order this is a must. Then check the cam sensor or oil sending unit, it is located between the engine and fire wall under the exhaust manifold.
SOURCE: Programming a keyless remote for a 1998 Plymouth Breeze
Most eBay sellers that deal with key fobs will provide programming instructions...ask the seller before you buy from them.
SOURCE: How to replace a headlight bulb in a 98 plymouth
these bulbs go in from behind the headlight assy. from under the hood look at the back of the headlight and locate the wiresgoing to the back of the headlight you can turn the connector or pull it out gently then turn the back of the bulb to remove it replacement is the reverse-- don't touch the glass of the new bulb, handle it by the base-fingerprints will shorten the life of a bulb of this type some parts stores will sell you the bulb and replace it for you if its not to hard for them-- too difficult then the automotive center at wally world or k mart will replace it for a fee
96 views
Usually answered in minutes!
×