SOURCE: 1999 Saab 9-5 oil pan torque spec
they should be torqued with a 3/8 torque ratchet to 30 inch pounds.
SOURCE: I need the torque specs and sequence on a 1998 chevy 350 vortec
Vortecs are a little different that old school small blocks, grab a Haynes or Chiltons, the cross patterns and specs are simply diagramed. Vortec, as any really, start with 25# then 45# and then final torque which I believe is around 70-75# but to be sure verify with the manual. AutoZones, Murry's, Adavance auto all carry the books, Cheap insurance.
Dan
SOURCE: i need bolt torque specs for a 2006 chevy cobalt
if you just go to a mecanic and ask what are the specks on that they should know but i think if you just tighten them down with an impact wrench till it is really tight after ou start the car it will run like **** then it will work its self out
SOURCE: need the torque specs and sequence for the engine
Torque on the oil pan bolts is 18 lb/ft. Tighten in a criss cross pattern slowly tightening the bolts down making multiple passes until you have them torqued.
SOURCE: need torque specs and sequence
Torque in a criss cross pattern to 5 ft/lbs, then repeat at 10 ft/lbs.
4,783 views
Usually answered in minutes!
×