2000 volvo S40. Where are the timing marks? What/Where are the timing marks to be set? I have changed the timing belt and put a lock on the cam gears so it could not go out of time. After putting it all back together it will not start but turns over good. What might be preventing the engine form starting?
Take out number one sparkplug, take the cam cover off. turn the engine of with a spanner on the bottom pulley. make sure number one piston is at TDC, now check to see if the inlet&outlet valves are close. and the piston is all the way at the top, do this with a long screwdriver to make sure it is.
if everything ok, then it will be a ignition problem.
868 views
Usually answered in minutes!
×