2003 Kia Spectra Logo

Related Topics:

James Posted on Jul 02, 2017

Have a 2003 Spectra can't shift into 2 gear or back to 1st

5 Related Answers

Anonymous

  • 2 Answers
  • Posted on Oct 02, 2008

SOURCE: 2003 nissan altima 2.5s transmission rough shift

Probably sensors! I have already replaced the crankshaft positioning sensor once, nissan replaced it once under recall and now it is bad again! Plus my speed sensor is bad too! Go to any part store and get diagnostic test ran, it will tell what sensors are bad.

Ad

Anonymous

  • 192 Answers
  • Posted on Apr 10, 2009

SOURCE: cannot shift into reverse although forward gears all functional

have ur shift linkage bushings replaced....most likely thse are torn or completely broken .. this is common on these models..also on some vw's of the same years

Anonymous

  • 1 Answer
  • Posted on May 27, 2009

SOURCE: won't shift out of 1st gear

Replace the output speed sensor on the front of the tranny. It has two wires going to it. ANd looks like a round plug with a bolt like base on it. It is also white.

Lance Birch

  • 109 Answers
  • Posted on Jul 01, 2009

SOURCE: Trouble shifting gears. Gears grinding while

YOU NEED TO TAKE YOUR TRANS OUT AND HAVE IT REBUILT, THE SYNCHROS ARE WORN OUT!!
THAT IS WHY YOU HAVE TROUBLE SHIFTING GEARS!!

Anonymous

  • 3489 Answers
  • Posted on Nov 02, 2009

SOURCE: Hummer H3 Losing power when shifting from 1st to 2nd gear.

as odd as this may sound, try replacing the fuel filter.

Ad

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

0helpful
1answer

At what RPM 1st gear should shift on a H2 Hummer 2003

well is that hummer that a 2 ton or 4 ton vehicle ?

would take a lot of revs for first gear to make it roll from a standing start
think it will be fitted with an 6 speed automatic transmission

guessing only from my heavy vehicle driving experiences
first should change below 3000 rpm

if transmission was slipping in first gear you would know

suggestion
ring up the local hummer service division for the correct answer





26308702-vt3chhdyttrsn1qpus3sq421-4-0.jpg
0helpful
1answer

A hard shift between 1st and 2nd gear?

Most likely a solenoid on the valve body. It is just a coil that when energized pulls in metal rods, some push. When most coils start breaking down, they only act up when hot. Could also be the valves themselves. Also a bad seal. Ask friends for a good transmission shop. Some one that won't tell you a rebuild and only change a valve solenoid.
0helpful
1answer
0helpful
1answer

Kia Spectra 2003. CAR DOESN'T START AGAIN AND WON'T START UNLESS THE BRAKE AND GEARS ARE MANIPULATED. Usually I have to press the shift release and shift into neutral before i get my car to start.

THERE IS A BRAKE PEDAL SWITCH RIGHT BEHIND BREAK PEDAL ARM ,SOMETIME IT SLIDES OUTOF BRACKET ALIITTLE MAKE SURE IT IS PUSHED ALL THE WAY TO THE BRAKE PEDAL
1helpful
1answer

2000 KIA Spectra/Shuma 1.5 Auto Transmission not changing gear. Hi, My auto transmission just started giving problem 2 days ago. First time I notice the problem is when moving off from stop in "D", the...

It is the prnd indicator switch on the shift shaft of the transmission,or a shift solenoid,or the valves are sticking in the valve body,try some lube guard,added to the transmission,it is great for stuck valves.
0helpful
1answer

2003 Kia Spectra odd rattle in shifter

You are most likely hearing metal on metal on the brake pads. The brakes are not attached to the gear shift in any way. Unless those Koreans have done some really wierd design.
Not finding what you are looking for?

225 views

Ask a Question

Usually answered in minutes!

Top Kia Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Brad Brown

Level 3 Expert

19187 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

15088 Answers

Are you a Kia Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...