See pg. 3-31 in owners manual. Start car in park. Adjust seat, telescoping wheel, and side view mirrors. Pust Mem button and then within 5 sec. push either 1 or 2. That button should light to show memory stored.
From the 2012 Guide (See link)
l"AUTOMATIC DRIVE POSITIONER (if so equipped) Two positions for the driver's seat, steering column and outside mirrors can be stored in the automatic drive positioner memory. Follow these procedures to set the memory positions: • Confirm the shift lever is in the P (PARK) position. • Push the ignition switch to the ON position. • Adjust the driver's seat, steering column and outside mirrors to the desired positions using the adjusting switches for each feature. • Push the SET switch and within 5 seconds, push the memory switch (1 or 2) for at least 1 second. • The indicator light on the memory switch you select will illuminate for approximately 5 seconds. • The driver's seat, steering column and outside mirror positions are now set to your preference. These memorized positions can also be linked to your NISSAN Intelligent Key®. For more information, refer to the "Pre-driving checks and adjustments (section 3)" of your Owner's Manual."
https://owners.nissanusa.com/content/techpub/ManualsAndGuides/Murano/2012/2012-Murano-quick-reference-guide.pdf
For added info see whole owners manual.
Did you ever figure it out?
×