2001 mit lancer can you remove the sump without taking the moter out

Yes, once you remove the exhaust system and center support member.

The answer is to replace the cable that flips the cover. What's most likely happened is that the cable has rusted in the lever mechanism under the carpet. This happens because of water getting in through the floor. Remove the drivers seat. When the carpet is up, look for rusted out metal plugs (about 30 mm in diameter) in the floor. Replace and fix any rust or leaks. Replacing the cable can be tedious, usually requires removing the trim in the trunk, and often taking out the back seats to get access. A garage would charge 2-3 hours of labour to do this job.

i read that ur problem is with a Mitsubishi lancer, and not an f-150. or u r question reflects sumthing else. nun the less :mit lancer ac fan is governed by a thermal shut off. if u use it it will run, if not it will shutoff. NOW: f150?? relays r in the box under the dashboard driver side. chk fuses first,cuz relays r tough to git at.lol!

This is a social web site

Those are questions you ask at the place you
choose to do business

Don't know why people from all over the world
would expect one set price for any work on
anything

The currency is different from one country to the next

You don't have a shop you use several times a year
for many years

I think most of the MiT Lancers have the same SLAVE, the difference is the size of the cup kit and the length of the PUSH rod.
Don't worry about having old parts for ur lancer, they have the same part as the Hyundai!

check moter and switch wichever is bad replace

take your car to mitsubishi dealer as far as i know, it only takes certain mits oil, chemicals in some oils can ruin the seals in the transmission.

Try this web site for info on Mits Galants http://www.thegalantcenter.net/forum.php

theres a chance there is a short. try taking out the fuse for the light and putting it back in or replacing it all together

change the oil pan gasket