Cars & Trucks Logo

Related Topics:

Can a motor and Trans from a 1993 park ave fit in 2001 regal? Do they have the same 3.8 engine

5 Related Answers

honeymokey

honeymokey

  • 3113 Answers
  • Posted on Apr 08, 2009

SOURCE: blower motor on Park AVe '94

Relace blower control module.

Ad

Jonah Oneal

  • 14092 Answers
  • Posted on Apr 11, 2009

SOURCE: i have a 1993 park ave and need to now how to reset the transmiss

if you got climate control air conditioner control buttons turn on ignition key enter the self diagnostic system. select pcm override ps13 tps sensor learn.press the warmer button. the driver information center should display 09.indicating that the garage shift value has been reset.select pcm override ps14 tran adapt.press the cooler button the dic should display90 indicating the up shift adapt value been reset.press warmer button the dic should display 09 indicating the steady state adapt value has been reset. press and hold the off and rear defog buttons on dic until the message .transaxle oil life reset is displayed on the dic.

Anonymous

  • 1 Answer
  • Posted on Jun 05, 2009

SOURCE: looking for location of fuel filter..2001 buick park ave..

Have your catalytic converter checked to see if it is plugged. I had a similar problem & converter was the fault.

Anonymous

  • 13 Answers
  • Posted on Jun 30, 2009

SOURCE: 2002 Buick Regal wiper motor parks wrong on dlay

remove cowling under hood to expose wiper motor linkage. You have to try it many times but the linkage may not be attached in the correct arc position. Trial by error.

hepcars

Howard Pfeiffer

  • 1249 Answers
  • Posted on Aug 31, 2011

SOURCE: My son's 1993 Park Ave Ultra would not crank after

most likely the crank position sensor...located by the flywheel...about $40. Ask for the location diagrahm at your parts store. Hope this helps.

Ad

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

0helpful
1answer

Transmission Range Sensor 1994 PARK AVE

Never thought about a Dealers Parts Counter?

How about the Auto Parts Store,On Line Parts Places,
Rock Auto.Com & 100's of others,Transmission Parts
Wholesalers

I can go on all night, if you like

Salvage Yard,Trans Shop
0helpful
1answer

RESISTOR LOCATION 1991 BUICK REGAL CUSTOM 3.8 PART NUMBER RU870

The blower motor on a park ave of the same year looks to be located near the middle of the firewall in the engine cmpt. The blower motor resistor you are referring to is part of that assembly. Please refer to the following diagram. Let me know what you find, good luck!

http://autorepair.about.com/library/images/bl107a-lib.htm
0helpful
1answer

Will a 1988 Buick Lesabre column replace a 1988 Regal Park Ave.

Lesabre and park ave should be the same and NOT regal.
0helpful
1answer

Would a 1998 fuel tank fit a 1993 park ave

Unfortuneately no, these are two completely different fill necks on the tanks themselves.The pump assemblies are a close match, but you would still need to do quite a bit of modification to make them work and I would not recommend it.I hope I could help, rate me accordingly, Thanks...
1helpful
1answer

1979 buick im not sure if it was a park ave or a 5th ave but i need a diagram on how the power steerign and altantor belt goes on i forgot which one goes in forn of the other i replaced the water pump but...

A park Ave. is a Buick and a 5th Ave. is a Chysler the Buick can have 3 different engines so I need to know which engine. The cysler 5th Ave. is a 318 400 or 440 the buick is a 455 350 olds or a 350 chev or a 350 buick. 3.8 buick. The 8th number in the VIN will tell your parts store guy and he shoul be able to prvide the belts and the picture of how they go on. Sometimes the picture is on the fan shrould and sometimes it's on the package the belt comes in ( some gates belts that only fit your car.
2helpful
1answer

Loosing fluid but not from a leak

ON THOSE CARS THE TRANSMISSION HAS A MODULAR VALVE THAT GO'S IN THE BACK OF THE TRANS I'VE FOUND THAT THE VALVE LEAKS THROUGH THE DIAPHRAM AND IS SUCKED BACK INTO THE VACCUM SYSTEM
AND IS BURNED ( CHANGE IT ) PROBLEM SOLVED
1helpful
2answers

How do I change Spark plugs?

93 park ave has a v8. Four plugs on each side. Followthe spark plugs from top of engine to spark plugs. Use a spark plug wire remover (plastic pliers) to help remove wire from plug. Mark each wire where they go. Go down to auto store and buy pugs and get a swivel spark plug wrench to fit the plugs anduse a extension with rachet to remove plugs (turn counter-clockwise to remove). Replace with new. (new plugs should screw in with fingers, then tighen with socket firmly. Not over tight. I holp this helps a little - ran out of writing space. Good luck
7helpful
1answer

93 buick park ave Ultra. replacing water pump...must I remove the front passenger side motor mount??

Yes. Put a jack under the motor and remove 3 bolts from side of engine and the long center pivot bolt in mount and the 2 bolts that go top down into the frame and loosen the 2 bolts below mount. Jack up the motor until you can separate the mount, leaving the engine side in and removing the frame side. The engine side can be moved out of the way without completely removing.
0helpful
1answer

1993 buick park ave will not change gears

Have your Catalytic Converter checked for free flow, (if it is stopped up with calcification from unspent fuel, then the car will have trouble moving at all). A tell tale sign of oncoming Catalytic Converter problems is the overdrive balking or wanting to hesitate, when the transmission is in overdrive the vehicle is running at its lowest r.p.m. and so like at idle it will stumble or hesitate, or cut the engine altogeter, for the motor has to be able to exhale, to exhaust its combustion gases, in order to run properly, stopped up catalytic converters are a big problem with this car.
0helpful
1answer

I can not find the neutral safety switch on a 2000 buick park ave

Sounds like passlock security failure.Park neatral swith located at top af transmission where shifter cable connects to trans,should be on drivers side.
Not finding what you are looking for?

31 views

Ask a Question

Usually answered in minutes!

Top Buick Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

15088 Answers

Brad Brown

Level 3 Expert

19187 Answers

Are you a Buick Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...