Question about 1998 Mercury Villager

Open Question

I have a 1998 Mercury Villager Van and have problems with the fan,

What cause the wires that connect to the fan from fuse box to burn. I also need a diagram for the wiring to the cooling fan please, and what fuses could it be. I have already replaced the coolant temp. sensor.

Posted by on


6 Suggested Answers


6ya staff

  • 2 Answers


Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017



  • 85222 Answers

SOURCE: hi im lookin for my

Here is a link to the owners manual for your truck that contains the fuse box locations and the diagrams of the fuse boxes (2). This is a Ford factory site and it is free. The fuse box information starts on page 138 of the pdf owners manual. Click the link please.

Posted on Jan 27, 2011



  • 85222 Answers

SOURCE: I need a fuse box diagram for a 1994 mercury

I am sorry but our diagrams only go back to 1996 model year. You can buy a used electrical manual HERE.

Posted on May 18, 2012



  • 21873 Answers

SOURCE: Where in the fuse box, is the fuse for window washer on 1995 mercury villager

You can research "Villager fuse box diagram" online and get the photos, the washers are on the same fuses as the wipers, number 8 for the front and 9 for the rear.

Posted on Sep 25, 2012



  • 1023 Answers

SOURCE: 95 Mercury Tracer fuse box under hood wiring diagram

On this website (link below) you find fuse box diagram and description for Mercury Tracer

Mercury Tracer fuse box diagram Auto Genius

Posted on Feb 18, 2016



  • 1023 Answers

SOURCE: 96 mercury cougar xr7 fuel pump

On this website (link below) you find fuse box diagram and description for Mercury Cougar 7th Generation (1989 - 1997)

Mercury Cougar 7th Generation 1989 1997 fuse box diagram Auto Genius

Posted on Feb 21, 2016

Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

94 mercury villager van, passenger auto seat belt motor running continuously & seat belt won't work. Drained battery. Where is the fuse located?

Engine compartment main fuse panel 30 AMP fuse Fuse #4 scroll down and look at this diagram picture on this link. caution, this fuse runs power seats, windows and sun roof as well.

Mercury Villager 1st Generation 1993 1998 fuse box diagram Auto Genius

Oct 15, 2016 | 1994 Mercury Villager

1 Answer

I have a 2000 Mercury Villager and the fuses for the turn signals and brake lights keep blowing. Why?

A burning smell is an important symptom of something VERY WRONG. Get it towed to a repair shop, and get them to trace the wiring harness.

Aug 21, 2015 | 2000 Mercury Villager

1 Answer

Window relay

Sounds more like a short circuit and/or wiring condition. Check for insulation cracks, bare wires, loose wires, or poor connections. Look for water damage or rusting. Fuses are not the problem.

Apr 15, 2014 | 1998 Mercury Villager

1 Answer

I have a 1998 mercury villager van it's not firing good and flooding what could this be?

sounds like the ignition control module in the distributor is bad

Nov 11, 2012 | Cars & Trucks

1 Answer

Headlight fuses keep blowing

You have a short circuit somewhere in the wiring. Either a cut or bare wire. If not, the headlamp is causing the short. Last resort, use a higher amp fuse (but this may compromise wiring system).

Jun 17, 2012 | 1998 Mercury Villager

1 Answer

My 1998 Mercury Villager will not stay running. Replaced fuel filter first. Fuel pump had a bad wire, fuse was blown. Fixed both and van still won't stay running.

Maybe a bad fuel pump. Is it humming niormally in the fuel tank?

Will it start for a few seconds? Need more info.

Go here for free help on V.


Mar 25, 2011 | 1996 Mercury Villager

2 Answers

Lost remote to disable alarm on 2000 mercury villager how can i disable it and start my van

If you have the factory alarm system, you can put your key into either door and lock and unlock the door, that signals the computer to deativate the alarm. If you have an aftermarket alarm system installed, it will have to be removed and the wiring that the alarm ties into must be restored to factory design.

Apr 23, 2010 | 2000 Mercury Villager

1 Answer

1998 mercury villger fuel pump and cooling fan wont work

these are separate problems. You have a black fuse and relay box under the hood by the battery. There are 3 cooling fan relays in that box. 1 for low speed fan, 2 for high speed fan. You also have a fuel pump relay there.
First I would check and clean the positive battery post connection. It has 2 smaller wires that go to all the accessories. The big one is for the starter. I probably would buy a new termianl end and replace it.

Also, go here for our Villager Quest forum. files & photos to help you fix you van.

good luck. please rate as fixya if this solves your probelm.

Mar 08, 2009 | 1998 Mercury Villager

Not finding what you are looking for?
1998 Mercury Villager Logo

Related Topics:

45 people viewed this question

Ask a Question

Usually answered in minutes!

Top Mercury Experts

gerry bissi

Level 3 Expert

4388 Answers


Level 3 Expert

85222 Answers


Level 3 Expert

5692 Answers

Are you a Mercury Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides