Cars & Trucks Logo

Related Topics:

2008 grand prix 3800 motor cranks good but wont fire

5 Related Answers

Anonymous

  • 1463 Answers
  • Posted on Nov 19, 2008

SOURCE: How many gallons can a 2008 grand prix pontiac hold?

hi


According to GM and www.feuleconomy.gov, the 2008 Pontiac Grand Prix has a 17 gallon gas tank.


hope this helps.


riz.

Ad

webzub

  • 13 Answers
  • Posted on Jul 19, 2009

SOURCE: 1998 grand prix stalled out doesnt have enough

if you got battery life in it, ur starter is heating up let it sit for a bit.. give the starter a few taps with a hammer or screw driver.. it should get you going for a while and if not you should buy a new starter or rebuild ur old one

Anonymous

  • 176 Answers
  • Posted on Aug 19, 2009

SOURCE: 2005 pontiac grand prix. Replaced the motor car

check at the coil pack if all connector where plugged, i think there is 3 connectors to plugged
do you have voltage at the coil module

Testimonial: "Great info still working on it though"

KCGTODAD

Shannon L Washam

  • 169 Answers
  • Posted on Sep 24, 2009

SOURCE: 1997 Grand Prix GT.new3800 and fuel pump, spark and gas, nofire!

Hello! When you swapped the engine, did you have the PCM (Powertrain Control Module) from the new motor as well? If not - you will need to have a "CASE" learn run on the PCM that you're currently using (the one from your previous engine). Important note: the 1997 Grand Prix GT's and GTP's have quite a few differences from the 98-03's. The CASE procedure is run using the Tech II tool and can be done at any dealership in about 10 minutes. If they aren't sure what that is, suggest to them that they follow the procedure for DTC 1336 - Crankshaft Position (CKP) System Variation Not Learned. :)


Hope this helps and good luck!

6bta

  • 400 Answers
  • Posted on Oct 15, 2009

SOURCE: i need instructions on how to change a crankshaft

It's behind the harmonnic balance. You WILL need a special puller set for this job. A normal blancer puller will NOT work. Once you get the balance off it is bolted to the engine. I'm not sure where one would find the puller set from besides a tool guy. Some of the auto parts stores have special tools they will loan out. May want to try them. I would imagine that if you need to purchace the tool then it may be cheaper to pay someone to do it. I know they are expecive through the big tool companies. Hope that helps.

Ad

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1helpful
1answer
0helpful
1answer

HOW TO REPAIR A P0650

Hi I'm having the exact same problem.. I have replaced the MAF, the crank sensor, the MAP sensor everything in my 2001 Grand Prix 3800 has been replaced! I was wondering if you had fixed yours? And I also own another 2000 Grand Prix and took the brand new MAF out of that and it still was still dying. I had to clear the codes to restart. Please help
0helpful
1answer

My 06 pontiac grand prix just cranks and wont start, what could it be

Been a mech for a while, may need a tune up if all original, plugs, wires at the least. Originals are usually good for 100,000 or so. Hope this helps.
2helpful
1answer

How do you replace a crank position sensor in a 2004 Grand Prix GTP?

series III 3800 engine, you have to get a harmonic balancer puller (can rent from autozone)
remove the balancer and you will be able to get at the crank position sensor.
while you are replacing, check the wires and make sure the insulation is in good shape and not showing bare wire.
5helpful
1answer

How do you replace crank sensor on a 2006 pontiac grand prix with the 3800 series 3 motor?

YOU HAVE TO REMOVE CRANKSHAFT HARMONIC BALANCER TO REPLACE CRANKSHAFT SENSOR.ITS LOCATED BEHIND IT.YOU NEED A HARMONIC BALANCER REMOVAL AND INSTALLER TOOLS.
1helpful
1answer

What kind of motor does a Pontiac Grand Prix have?

Depends on what sub-model you have. If you have an SE its a 3100 3.1L Engine. If its a GT its a 3800 3.8L Engine. If its a GTP its a 3800 3.8L but with a supercharger.
0helpful
2answers

What engines will fit a 1998 grand prix

You will only be able to fit a 3800 engine in this car. If you would really want to swap a different motor a 3800 superchanged L67 engine will fit but you will need a heavy duty tranny from the 3800 motor and you will also need a wireharness injectors and harness and also a PCM. You can find these motors for a pretty cheap price on moradparts from ebay. They also have their own website. Very very good place to buy used W body GM parts
0helpful
1answer

2005 grand prix wont start?

If you deffinitely have fuel and spark then it must be a timing issue.

It's ok have fuel & spark but if in the wrong place at the wrong time it won't start. Check that the timing marks to and bottom are correct, the belt could have jumped.

Is it back firing into the inlet when trying to crank? Like a loudish popping noise.
Not finding what you are looking for?

165 views

Ask a Question

Usually answered in minutes!

Top Pontiac Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

15088 Answers

Brad Brown

Level 3 Expert

19187 Answers

Are you a Pontiac Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...