1993 Oldsmobile Cutlass Supreme Logo

Related Topics:

Erica Baird Posted on Apr 06, 2017

I don't have a hood latch cable at all. The cable came all the way out. How to open the hood without a hood latch

5 Related Answers

Anonymous

  • 196 Answers
  • Posted on Jan 11, 2009

SOURCE: Hood won't open. Cable is broken and can't get hood to pop.

NO there is no manual way . get a good flash light and look at teh latch through the grill or from under the truck and try and pop it with a long flat blade screw driver

Ad

Lyle D. Rowh

  • 744 Answers
  • Posted on Oct 18, 2009

SOURCE: I cannot open the hood on my 95 Olds 98 LSS the

Probably need to take the grille out to get to the latch.

Testimonial: "Thank you, I was hoping for a picture of the latch's location but I was considering this myself so it is nice to have a confirmation"

micah lenfest

  • 540 Answers
  • Posted on Dec 11, 2009

SOURCE: Can't open 94 Suburban hood. Latch is no longer

you can open it with a long thin screwdriver. Look thru the center top of the grill. You should be able to see the cable running to the latch. Follow the cable to the end and you should be able to get in there with the screw driver and fish around to get it to unlatch. After you get it open you can tie a piece of wire to the latch sticking out of the grill to pull on and release it till you can get it repaired. Most likely the cable or pull handle is broken

dogwood32

  • 432 Answers
  • Posted on Jan 24, 2010

SOURCE: gmc astro van hood latch not opening

Try smacking down on the hood with a open hand.You may want to have someone inside to pull the lever while you hit on the hood.If you do get it open spray everthing down with a good lubicant.Well good luck and hope this helped.

Testimonial: "It worked just fine .I also used some wd40.Thanks"

Colin

  • 1584 Answers
  • Posted on Mar 30, 2010

SOURCE: the cable to the hood latch broke at the latch

Need to "pick" it from underneath

Ad

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

0helpful
1answer

Can't get our hood open

Hood latch or cable is frozen up (rusted). These can be a challenge to get fixed, because you don't have access. You can try to see if you have access through the front grille or go under the car and look up for the latch. Hopefully you can get to the latch and release it. My worst one was a mid 70s Corvette with the latch by the windshield (hood opens forward). This latch was above the cowl assembly and you had to work around the engine. Good luck...
0helpful
2answers

1988 hood latch will nor release, how do I open hood?

hood release is easy.make a tool - buy small steel rod from hardware store.1st bend 1 inch slight hook2nd bend 3 to 5 inches at 60 degrees anglefold over the handle twice and tape.slide in fish and pull. it opens easy and i can get it within 10 seconds.look at pictures. you need a stiff rod so don'i use a hanger and buythe steel rod same *** as a hanger -thin. bend in vice.so easy. 3_17_2012_8_20_05_pm.jpg3_17_2012_8_20_31_pm.jpg3_17_2012_8_20_53_pm.jpg3_17_2012_8_21_18_pm.jpg
0helpful
1answer

Hood latch cable broke need to open hood

The hood release cable seems to be malfunctioning on my 2001 Pathfinder SE. The inside release handle pulls without much restance and does not return to it's proper position. The hood does not unlatch. It seems that the cable is broken. How do I open the hood?
0helpful
2answers

Front damage, inside cable to open hood snapped from latch. latch damaged and can't open hood. Know of any way to pop the hood? 1991 park avenue

Usually a strong coat hanger will snag the lug the cable attaches too. You will need to bend a 3/8 end J hook from the coat hanger and snag it from the drivers side of the latch to pull on this lug horizontally
' If the hood is trashed just zip a hole into the hood were that latch is located with a disc grinder and a cut off wheel instead
3helpful
2answers

The hood latch cable broke under the hood how can i open it

Saturn Vue hood release can be opened (if the cable is not broken) by disconnecting the cable from the back of the release lever, grabbing the ball on the end of the cable with some large pliers ("channel locks") and pulling hard. A metal "wire keeper" bracket clamped to the cable end under the hood to serve as a spacer and the release lever works.
The purpose of this bulletin is to provide a procedure for opening the hood on the Saturn VUE and ION vehicles should the hood latch release cable mechanism become inoperative.

VUE Hood Opening Procedure Modify the Saturn radio antenna by bending the antenna mast 1 in. (2.54 cm) above the antenna base to a 25 degree angle

Open hood of similar vehicle to locate hood latch release cable to hood latch attachment point.

Using modified antenna, note approximate location that antenna will have to enter in between fascia and hood to access the hood latch cable attachment point. This should be toward the left edge of the Saturn emblem. Also note position of the modified antenna base. It should be angled downward.

Note: Use protective tape on the hood and fascia where the antenna will be inserted to protect the surfaces from scratches
On vehicle with inoperative latch, insert antenna between hood and fascia and depress the hood latch cable until the hood is opened.

Good luck and thank you for using fixya

0helpful
2answers

Hood blew open, now shut and can't get open, what to do. Have tried everything to get it open, need solution

Is the hood bent just enough where it wont latch? Try to put a 2x4 near the back part where the hinge or shock go and close hood gently andpush gently until hood bends back to shape and will close
1helpful
2answers

HOOD RELEASE CABLE CAME UNDONE AT THE LATCH ASSEMBLY. HOW DO I OPEN IT WITH OUT THE CABLE WORKING?

remove front grille then you have to fiddle about with the catch it is quite tedious but the only way or take to a dealrship
1helpful
2answers

Hood won't open. Cable is broken and can't get hood to pop.

NO there is no manual way . get a good flash light and look at teh latch through the grill or from under the truck and try and pop it with a long flat blade screw driver
1helpful
2answers

HOOD RELEASE CABLE BROKE, HOW DO I OPEN HOOD?

After trying to pull the cable from under the hood and accidently working it loose from the latch, I had a mechanic come out to the vehicle, and he drilled two 3/4" holes that lined up with the latch mounting screws so that he could dismount the latch mechanism from the body of the Jeep. Then the whole latch assembly came loose with the hood. Next, he reattached the latch, and then attached a wire to the latch so that it can be pulled to work the mechanism without the old cable at all, though at the expense of security, because now it can be opened from outside the vehicle, but it's difficult to find unless you know what you're looking for. This might be a little more than most people are willing to do, but it worked for me.
Not finding what you are looking for?

182 views

Ask a Question

Usually answered in minutes!

Top Oldsmobile Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Ronny Bennett Sr.
Ronny Bennett Sr.

Level 3 Expert

6988 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

15088 Answers

Are you an Oldsmobile Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...