Cars & Trucks Logo

Related Topics:

F
Floyd Durfey Posted on Apr 05, 2017

I need a schematic drawing for installation of a keyed lock tumbler for a 1984 Dodge van, B150 with a nontilt steering wheel.

Reassembly of the steering wheel became confusing and I had parts left over.

5 Related Answers

USfalcon

anwar alkhaldi

  • 197 Answers
  • Posted on Mar 17, 2009

SOURCE: locked steering wheel

try to spray inside the key lock cylinder (the place where u put ur key ) by PB puster or WD40 then turn the steering wheel lift and right with try to turn the key to position on
i hope this will help

Ad

Anonymous

  • 4 Answers
  • Posted on Apr 20, 2009

SOURCE: key won't turn, steering wheel locked, brakes locked.

With the key in the ignition, tap on the key with something heavy like a pair of pliers, screwdriver etc. It will cause the pin inside the mechanism to drop, and the iginition will turn. Happened to me today, worked like a charm.

Anonymous

  • 1 Answer
  • Posted on Jun 12, 2009

SOURCE: can't turn key in ignition lock cylinder 2000 dodge stratus

heat it up with a hair dryer

Anonymous

  • 131 Answers
  • Posted on Jun 14, 2009

SOURCE: cannot unlock the steering wheel on oldsmobile intrigue 2001

is it the right key for that car? cause if not then that is the problem... if it is the right key, then you might have to replace the key cylinder cause you may have something broken in it...

woodchuck789

Charles T Nevin

  • 4070 Answers
  • Posted on Sep 06, 2011

SOURCE: need to look at exploded

Try this DIAGRAM. Good luck.

Ad

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

0helpful
1answer

Dodge ram b150 (1984) shifting issues and diagram requests

NO GOOD THAT, BITS LOST
sounds like they defeated park lockout
and now all is locked out even waving a tree branches.
don't you just hate hacked cars, some can be super hard fix
lacking old 1984 parts and books on it
I see books now pre 1989 are week do to no digit books then.
paper only.
for sure 2 things. on this hydramatic only transmission.
1:linkage is bad or park lockout failing hard,
2: transmission dead in D ,L or R bad trans.

USA manual here

https://eautorepair.net/Marketing/Default.asp
0helpful
1answer

I was given a 1984 Chevrolet pick-up(54,000 miles. needs freeze plug) from my Uncle with a key half broken in the ignition. I don't have the other part of key. I need to remove the key tumbler so

You will need a trip to the your local parts store. You should be able to buy a brand new lock cylinder for about 15-20 dollars. Tools needed will be a socket set, steering wheel puller, phillips screwdriver, and a set of torques bits and driver. If you pull the steering wheel and unscrew the hazard knob and turn signal arm, then unscrew the turn signal switch you will be able to remove the mounting screw that holds the lock cylinder into the coulmn. install new cylinder and now you have a new key for the truck.
8helpful
2answers

2000 dodge caravan key will not turn can not start car steering wheel is locked

The tumblers in the lock cylinder are stuck and this prevents the key from turning. Spray some lubricant into the cylinder, insert the key in and out numerous times and also hit the end of the key with a rubber hammer while it is in the cylinder and this will help to release the tumblers.
5helpful
3answers

Can not turn the ignition key, to start car?

This is a very common situation that arises when the steering-lock mechanism binds, it is usually because the wheels are jammed against the curb.
Follow the instructions below to solve the issue:--
1) First of all make sure that the transmission is in park. Set the parking brake to prevent the car from rolling farther against the curb
2) Pull hard on the steering wheel while turning it in both directions. This will normally free the wheel, but if it does not help. then,
3) Release the parking brake and put the transmission in neutral. Let up on the foot pedal just enough to rock the car slightly.and now turn the steering wheel again. this time the key should turn now.
Thanks. you can rate this solution and show your appreciation.
1helpful
2answers

The key will not turn in the ignition. The

you have bent tumblers inside the lock cylinder. A replacement will be needed for this repair. The old one is unuseable since the tumblers are stuck inside and the key does not turn it no longer
0helpful
1answer

Locked steering wheel

remove top and bottom of steering colomn co(need torqs 20 driver)then check to see if the ign lock is on a white box aprox2x3 f so purchase a new ign switch with lock and tumbler(should have new key)remove old switch (need tamper proof torqs bit for this)INSTALL NEW SWITCH
0helpful
1answer

2006 Durango problems

try tapping the lock cylinder with a small hammer...some times this will jar the tumblers and allow it to turn...if this works the lock cylinder is going bad and will need replaced
Not finding what you are looking for?

45 views

Ask a Question

Usually answered in minutes!

Top Dodge Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

15088 Answers

Arnie Burke
Arnie Burke

Level 3 Expert

7339 Answers

Are you a Dodge Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...