SOURCE: lINCOLN ls bRAKE lIGHT REPLACEMENT
One of 2 ways.......
#1) mounting screws on the exterior of the brake light lens.
#2) in the trunk behind the carpeting, usually this is the easiest way. either way the bulb is held in by a twist lock bulb holder.
GGBMDB
SOURCE: 2002 LINCOLN LS V6 3.0 PCV VALVE LOCATION
it is down under the intake manifold. the intake manifold must be removed to get to it. this vehicle is known for developing a vacum leak in the elbow hose that connects to pcv valve, so ive done a few.
SOURCE: Honda Accord Map Light bulb
the cover is removed straight down, slowly working it with a thin tool or butter knife. WD40 to front and rear edge (there's nothing medial or lateral). The cover has 2 Y clips on each side, one about half way, and one that clips straight off of the hinge post. There are no "tabs". It will eventually unclip straight down. Then can replace with a DE3175 LED bulb (V-LEDs.com)
SOURCE: DTC Codes
the computer picked up a mis fire on #1 cylinder,if the car is not missing it should correct its self and clear the code
Testimonial: "Good info as this is the second time this has happened in the last year. Thank you!"
SOURCE: How to change the fog light bulb on a lincoln ls
get under the car and the fog lamps will be on the corners of each side. all you do is twist the electrical connector to the right and it will come out to install one re connect the new bulb and line up the connector and turn to the left to lock it in place
467 views
Usually answered in minutes!
×