Where is the code for a 1999 mercury sable - 1999 Mercury Sable

SOURCE: 5 digit code to unlock my 1997 Mercury Sable

It is located on the keyless entry module located under the drivers side dash. There will be a five digit code on the side of the box facing the passenger side. Enter the code and it should unlock. Follow owners manual to change the code, it will store both codes at the same time and either should work.

SOURCE: Looking for shift solenoid on 1999 Mercury Sable

I believe these are internal you must drop the trans. pan down to access it.

SOURCE: power steering leak on passengers side of 1999 mercury sable.

If it "RED" in color, like p/s fluid, and coming from the BOOT, then its your p/s rack assembly.The unit has to be replaced and alignment reset. ..also check the HOSES they are prone to leak also...hope this helped..GL

SOURCE: got a code 1742 on my sons mercury sable

Okay this is a internal problem in the transmission you will need to remove side cover and oil pan of the transmission.This is a big job to do it safely you will need a hoist and engine cradel this a profesional job my advice to you unless you have done this before 2 or 3 times take it in for service this is a delicate job mistakes can resault in costly mancanical further repairs.Hope this helps,John

Testimonial: "seems like it should not be as hard as you say "

Aobd2

• 1049 Answers
• Posted on Jul 08, 2011

SOURCE: 1999 mercury sable engine code

for p0401:
In fixing this code, it is quite common for people to just replace the EGR valve only to have the OBD code return. The EGR valve is not always the culprit.
Use a vacuum pump and pull the EGR valve open while monitoring engine RPM's & DPFE voltage. There should be a noticable difference in RPM's with the EGR open.
Clean out the EGR valve and/or tubing to remove deposits.
Check the voltage at the DPFE, compare to specified values (refer to a repair manual for your specific model).
Replace the DPFE sensor (with a good quality / OEM one).
Replace the EGR valve.