1999 Plymouth Breeze Logo

Related Topics:

Raymond Hinton
Raymond Hinton Posted on Mar 25, 2017
Be the first to answer

1999 plymouth breeze low beam headlights will not work. Fuse is good. Changed the bulbs, and they still won't work. What could cause that?

Answer This Question

5 Related Answers

Anonymous

  • 319 Answers
  • Posted on Mar 18, 2009

SOURCE: low beam headlights not working

check voltage at switch

Ad

Anonymous

  • 255 Answers
  • Posted on Apr 18, 2009

SOURCE: breeze's brake light went out. changed bulb, now whole tail light won't work.

sounds like you put the wrong bulb in, that will make it blink fast. re check

Anonymous

  • 1071 Answers
  • Posted on Jul 21, 2009

SOURCE: My 1999 Plymouth Breeze has the horn on all the

it is in the clock spring behind steering wheel contacts are broke completing circuit and making horn work

Anonymous

  • 127 Answers
  • Posted on Oct 03, 2009

SOURCE: headlight low beam

Test to see if you have voltage at the bulb connector in low beam position. I'd almost bet that if there is no voltage there for the low beams that you have a bad high/low switch.

Anonymous

  • 534 Answers
  • Posted on Oct 08, 2009

SOURCE: My 97 plymouth breeze's right rear tail light went

It is most likely another faulty bulb in the turn signal circuit.
Ensure the indicator bulbs are replaced with the correct (specified) wattage rating.
Check you haven't dislodged or otherwise lost the ground connection to the rear tail light bulb sockets.

Ad

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

0helpful
1answer

1995 Mercedes e 320 driver side headlight stopped working. Bulb is good
Solution: If both headlights aren't working, it's unlikely that a bulb is at fault. The likely cause is a fuse, headlight relay, headlight switch, dimmer switch or a wiring fault. ... Consult your owner's manual to locate the main fuse for the headlight circuit and replace that fuse with one having the same amp rating.
OR
Most total headlight failures are caused by a bad component like a fuse, relay, or module. Wiring problems can also cause both headlights to stop working. High beam headlights don't work or low beams don't work. The cause: A burned out bulb, or a problem with the high beam switch or relay.
https://www.lifewire.com/fix-non-working-headlights-4137021
Read full answer
May 09, 2020 • Cars & Trucks
1helpful
2answers

Headlight Issue on 1999 VW Golf GTI VR6. I just purchased this yesterday and noticed that the lights will not switch from High to Low beam. (High indicator doesn’t switch off) Installed a new Headlight...
Most total headlight failures are caused by a bad component like a fuse, relay, or module. Wiring problems can also cause both headlights to stop working. High beam headlights don't work or low beams don't work. If just one bulb fails to work in either high beam mode or low beam mode, it may be the bulb. Check your manual to find your headlamp relay.
Read full answer
Jan 07, 2019 • Volkswagen Cars & Trucks
0helpful
2answers

Why doesnt headlight work on low beam left side?
Bulb may be no good as in headlight bulbs one filament can go leaving only either low beam or high beam operational on one headlight so change the bulb first on that side other than that could be power related
Read full answer
Apr 17, 2015 • 1999 Volkswagen Beetle
0helpful
1answer

No power to right side (PS) headlight low beam plug socket, new bulb, fuse is good. High beam works, blinker works, park light works. just no low beam and doesn't register any voltage on volt meter.
check low beam fuse when switched on if it has voltage registering across the fuse ,if there is voltage across the low beam RHS fuse then it is possibly a pinched wire from the headlight running back towards inside of the car
Read full answer
Jan 30, 2014 • Cars & Trucks
0helpful
1answer

The low beams stopped working but my high beams still do on my 1999 Mazda Protege.
  1. I own a Protege and once the low beam bulb burns on one headlight the car electronics quickly cook the bulb on the other headlight as well. it is a poor design by the mfr. Pull both bulbs to make sure the low beam is not cooked.
Read full answer
Nov 17, 2017 • 1999 Mazda Protege
1helpful
3answers

My low beam headlights won't work but high beams work fine. I changed the bulbs and it still doesn't work
High beam switch moat likely, have you checked relays and fuses?
Read full answer
Mar 28, 2013 • 1991 Nissan 300ZX
0helpful
1answer

My headlights don't work, but the brights do. What caused this and how can I fix it?
Every headlamp has a bulb inside that has two filaments one for high beam and the other one for low beam, if any of those filament is cut then that beam (High or low) won't work. If your high beam work then your fuse it's ok, so you can visually inspect your headlights bulbs for broken filaments. remove bulb socket and remove the bulb carefully to inspect the filaments. if the filaments are atacched from one terminal to the other then the bulb it's ok, if not replace the bulb.
Read full answer
Jun 28, 2011 • 2002 Chevrolet Suburban
0helpful
1answer

I have replaced both headlight bulbs(bulb number 9007), high beams work just fine, the low beam on the right side still does not work?
Hello butterisi: My name is Roger and I Will help you. I would look in the fuse box under the hood Specifically fuse 13. This is the fuse for the right low beam headlight. If ok I would suspect the multi function switch. Which is also the turn signal switch. Should you need further help please just ask. Please rate the answer. Thank You for using Fix Ya. Roger
Read full answer
Jan 15, 2011 • 1998 Plymouth Breeze
0helpful
1answer

Breeze's brake light went out. changed bulb, now whole tail light won't work.
sounds like you put the wrong bulb in, that will make it blink fast. re check
Read full answer
Apr 18, 2009 • Plymouth Breeze Cars & Trucks
0helpful
1answer

Low Beam
Make sure you have a good switch
bulbs good
relay and or fuse is good
Read full answer
Jul 02, 2008 • 1998 Volkswagen Cabrio
Not finding what you are looking for?

View Most Popular

1999 Breeze

  • Cars & Trucks

Related Question

1995 Mercedes e 320 driver side headlight stopped working. Bulb is good

  • Cars & Trucks

113 views

Ask a Question

Usually answered in minutes!

Popular Questions

How do I replace the serpentine belt on my 2000

Plymouth Breeze Cars & Trucks

Overheating coolant boiling out into reserve tank

1998 Plymouth Breeze

Ignition fuel starter fuse keeps blowing and it won't start

1998 Plymouth Breeze

1997 Plymouth Breeze won't start...has no spark

1997 Plymouth Breeze

Codes P1782, P0755, and P0700

Plymouth Breeze Cars & Trucks

Check Out the Latest Top Trucks Report!
Check Out the Latest Top Trucks Report!

View all Fixya Reports

Top Plymouth Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Ronny Bennett Sr.
Ronny Bennett Sr.

Level 3 Expert

6988 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

15088 Answers

Are you a Plymouth Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...