1996 Mazda MPV Logo

Related Topics:

b
brenda parra figeroa Posted on Mar 23, 2017

Mazda mpv 1996 location fuel pomp relay - 1996 Mazda MPV

5 Related Answers

emissionwiz

Marvin

  • 85242 Answers
  • Posted on Mar 11, 2009

SOURCE: Location under hood for fuel pump relay on 2002 Mazda Millenia S

JUST RELEASE THE PRESSURE AT THE FUEL PRESSURE TEST PORT ON THE FUEL SUPPLY RAIL THAT SUPPLIES THE INJECTORS, IT IS A METAL VALVE LIKE A TIRE VALVE, THAT IS THE FACTORY RECOMMENDED METHOD..

Ad

Anonymous

  • 202 Answers
  • Posted on Mar 24, 2009

SOURCE: can't find reset switch for fuel pump on mazda mpv

It is typically located in the rear of the vehicle in one of the side compartments. It has a red button on it. I would also check the fuel pump fuse, and relay.

Anonymous

  • 155 Answers
  • Posted on Jun 08, 2009

SOURCE: 2004 mazda MPv Where is the location of cyl. #6?

The firing order is 1-4-2-5-3-6. The cylinders are, front bank is from drivers side to passenger, 6-5-4 , and 3-2-1 at the firewall.

bbbman78

Drew Z

  • 681 Answers
  • Posted on Mar 15, 2010

SOURCE: 96 mazda mpv minivan 165k mi. Ran fine until one

I was browsing unsolved problems. If you still have the problem, I'll try to help you. But it's going to be awhile trying to communicate back and forth. First...Check the engine for spark. Take off a plug wire and stick a screw driver in the wire end and place the metal part of the screw driver next to something on the van that's metal. Have someone crank it over for just a second or two and see if a small spark jumps from the screw driver to the metal part. I'll check back for your answer.

Anonymous

  • 47 Answers
  • Posted on Apr 16, 2010

SOURCE: fuel filter location 97 mazda mpv

Under the hood on the passenger side wheel well. Can be tricky to get at and remove. You will need a 10mm socket to loosen the clamp holding the filter in place, but you will need to undo and remove the fuel lines first. These are under high pressure so it is a good idea to drain the pressure off the fuel system before removing the lines.

Ad

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

0helpful
1answer

How do I know wich one is the relay for the gaz pomp on a 1999 Mazda B2500

You look it up in factory service info , look at a wiring diagram , fuse box diagram etc.... This vehicle also has an inertia fuel shut off switch . You can view all this at http://www.bbbind.com/free_tsb.html

Also know that the PCM - engine computer turns on the fuel pump relay . If there is no crankshaft position sensor (RPM signal ) to the PCM ,the PCM will not turn on the fuel pump relay . Relay #5 is fuel pump relay . Do you know how to test electrical circuits ? Use a Volt meter ? Or are you just going to replace the relay and hope that's the problem .
0helpful
1answer

Kick-down relay

check down this link:
http://mazda626.net/topic/36445-96-mazda-626-fuel-pump-relay-location/



Truck Performance Parts
3helpful
1answer

Need to know location of fuel pump relay on a Mazda mpv 3.0l v6 1997 model

The pump is in the tank. Before you consider dropping the tank. Lift the carpet in the back seat above the tank. The older MPVs had a trap door which would access the pump with out dropping the tank. It is definitely worth a look. I changed mine in half an hour.
2helpful
1answer

Mazda MPV 1995 , over heat quickly

Your cooling fan(the electric fan in front of the radiator) is either damaged or not spinning. Don't drive it, until you get it repaired, or you
will seriously damage the engine.Good luck.
1helpful
2answers

Need to know location of fuel pump relay on a Mazda mpv 3.0l v6 1997 model

The fuel pump relay is located below the right side of the dash to the left of the engine control module. There is also a 15amp fuse
for the fuel pump. In the fuse block under the left side of the dash
fuse #19. Hope this helps.
0helpful
1answer

96 mazda mpv minivan 165k mi. Ran fine until one day just died.Had towed home.3 mech.tried diagnose gave up wouldn't start-turns over-no start. Last mech.replaced timing belt&idle pulley. Still no...

I was browsing unsolved problems. If you still have the problem, I'll try to help you. But it's going to be awhile trying to communicate back and forth. First...Check the engine for spark. Take off a plug wire and stick a screw driver in the wire end and place the metal part of the screw driver next to something on the van that's metal. Have someone crank it over for just a second or two and see if a small spark jumps from the screw driver to the metal part. I'll check back for your answer.
0helpful
1answer

96 mazda mpv minivan 165k mi. Ran fine until one day just died.Had towed home.3 mech.tried diagnose gave up wouldn't start-turns over-no start. Last mech.replaced timing belt&idle pulley. Still no...

step on fuel pedal to the floor, turn it over if it starts sumthing in fuel line, can you hear your feul pump when you turn the key???? is your distributor cap ok, all the wires ok hooked up, mite fuel pump relay, or just a fuse under dash under hood..
1helpful
1answer
6helpful
1answer

Can't find reset switch for fuel pump on mazda mpv

It is typically located in the rear of the vehicle in one of the side compartments. It has a red button on it. I would also check the fuel pump fuse, and relay.
Not finding what you are looking for?

165 views

Ask a Question

Usually answered in minutes!

Top Mazda Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

15088 Answers

Arnie Burke
Arnie Burke

Level 3 Expert

7339 Answers

Are you a Mazda Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...