Where on ford bronco's vin. number tells the year of manufacturing?

Some of my info says 5.8L engine vin H, if that is the original engine? The eight letter of vin should be the engine code.

Look at your registration, note "model year" If you ar still unsure, call a Ford dealer and ask them to look up your vin #. They will know for sure.

Hi there:
You have several engine sizes there:

1993 Ford Bronco Full Size 4.9 liter L6 VIN "Z"





1993 Ford Bronco Full Size 5.0 liter V-8 VIN "N"





1993 Ford Bronco Full Size 5.8 liter V-8 VIN "H"






Hope this hesl; remember to rating this answer.

well first off which tranny do you have?? if the vin code is T it is automatic-A4LD, which was used in the years of 1984-1990 if you have a manual tranny then it might be one of these two.. toyo koygo tk5 vin code is 5 which was used in the years of 1985-1987, they also used a mitsubishi FM145 vin code D in the years of 1985-1987 hope that helps..

1-4-2-5-3-6
Now you need to know which cylinder is which. If you stand at the front of the truck looking at the engine, the number 1 cylinder is on the left closest to you. The left bank has cylinders 1-3-5 and the right bank has 2-4-6. So number 1 is at the left front and number 6 is at the right rear.

Using your VIN number, 17 digit number found on dash in front of drivers side, take number to a ford dealer and this number will tell you everything from engine, tranny +
I hope this mayhave helped,
Tom

by using the vin number

.
9th digit of VIN is engine code. "A"= six cyl: "B"= 5.0L carb, "C"= 5.0L FI, "D"= 351. ect, ect, ect.

The vehicle identification number - aka "VIN" is located on the top of the dash board,, passenger side,, close to the windshield....
And is a metal strip with raised letter and numbers..

take the vin along with the paper of the truck to show it you and the year to a ford dealer or mercury dealer and they should be able to help you and the other way is to call a locksmith but going to the dealership yourself will be cheaper.

look on the label on your driver door or the door jamb and it should tell you