Does the clutch have the outer clutch slave or is it inside the clutch plate area, to know look on the left or right side for a clutch slave cylinder if it does not have one it's internal and a pain. If it has an out side one fill the master reservoir then go under the truck and crack open the bleed valve on the cylinder have someone pres the clutch pedal all the way down and hold it to the floor, then close bleed valve then allow the clutch back up and have them push it to the floor open bleed valve and close when all air comes out do this till the arm moves it's full travel about 2 inches. And if its one with a master inside the transmission it has to be power bleed and normally you can’t do it without pulling the transmission.
385 views
Usually answered in minutes!
×