SOURCE: timing mark-specs
ADVISE YOU NOT TO TOUCH THIS UNLESS UR MECHANILLY COMPENENT YOU NEED SPECIAL TIMING PINS & BAR FOR THIS & ARE NOT THE EASIEST TO TIME UP.
SOURCE: need 2001 vw passat 4cyl. 1.8t. timing belt diagram
try www.autozone.com to see if they have your car listed for diagrams pictures and step by step instructions if your car is not listed then try your local library they have all the car manuals and even copy them for you
SOURCE: timing marks for a vw 2000 jetta vr6
well learn how to time engine with no timing marks,its easy .look on end of cams for a slot or some sort of mark on the cam bearings caps .If you cant find anything then no 1
piston at the top and both valves closed with cam lobes in the air so to speak.dont forget to turn crank twice with a rachet before you evan think of trying to start engine.
SOURCE: vw golf 1.4 16v after changeing timing belt car
The timing could be 180 degrees out you will have to do it all over again. Bring #1 cylinder upto TDC check the distributor rotor arm that it is pointing to #1 plug wire, It is important that the cams are on the intake stroke and not on the exhaust stroke. The crank is no big deal just make sure the marks are lined up.
1,166 views
Usually answered in minutes!
×