2000 Mercury Mountaineer Logo

Related Topics:

Larry Kelly Posted on Mar 11, 2017

2000mercury mountaineer lights on passenger side only dont work including brake light

5 Related Answers

Anonymous

  • 1201 Answers
  • Posted on Jan 23, 2009

SOURCE: rear brake lights will not go out

look under under dash board behind and near top of break pedal shaft there is a brake switch, might be stuck in the in position.

Ad

Anonymous

  • 23 Answers
  • Posted on May 01, 2009

SOURCE: turn signals dont work brake lights dont work

You didn't mention your rear brake lights. If they don't work either then you probably have a bad light control module (LCM). This is a common problem with big Fords. You can buy a replacement part ($250) or have yours rebuilt (www.autoecu.com). The module is located under the dash to the right of the steering column and is fairly easy to replace.
Do the turn signals work? If not it may be the turn signal switch. The aftermarket parts are cheaper than a Ford factory part; check the guarantee before deciding.
Worse case scenario? You need both parts.

Anonymous

  • 131 Answers
  • Posted on Jun 09, 2009

SOURCE: brake lights don't work on my 04 dodge durango

get yourself a cheap multimeter from a store like radio shack etc. with someone pressing the brake check at the socket to see if you have any power. remember it is DC volts not AC.. if you dont have any power check the grounds, there are a few, under the truck, and under the hood by the engine,if that doesn't work, you can try popping the rear covers off at the back and you might have loose wires, give a light tug on the wires and see if any pull away from the body.... look close at the bulb plug, you can also have a loose wire there or a broken ground tab... hopfully this can help you... if you have any more of a problem let me know...

dennymulford

Dennis Mulford

  • 1055 Answers
  • Posted on Aug 22, 2009

SOURCE: the rear passenger side window doesn't work -

can you hear the motor?
if so its prob got bad cables
get the whole unit off e bay new for less than 50.00 as 150 at the dealership!!!

Fixitman909

Tommy Thomas

  • 430 Answers
  • Posted on Aug 29, 2009

SOURCE: Brake lights out.

CHANGE BULB ON LEFT SIDE WITH PROPER BULB

Ad

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

0helpful
1answer
0helpful
3answers

Why doesn't passenger side brake light work?

1. Defective wiring
2. Defective socket
0helpful
1answer

2007 Dodge RAM My rear running lights work. Drivers rear brake light and third brake light work, but passenger rear brake light does not work. Lights are LED.

You have a short in the cross over wire. Almost all cars and trucks have one main break wire with a second wire "y" in off to the passenger side . You could just wire in a cross over and disconnect the old one.
0helpful
1answer

2000 mercury mountaineer brake ligts dont work on passenger side only

Do electrical circuit testing using a wiring diagram ,so you know which wires to test. Do you know what a DVOM - digital volt ohm meter is ?
Basic Electricity for Service Techs Ohm law Current Flow Opens Shorts

How to Use Multimeter to Troubleshoot Common Problems

Electric Testing Techniques You Need to Know

Free wiring diagrams at https://www.bbbind.com/free_tsb.html
Enter vehicle info. year , make , model an engine size . Under system click on lighting ,then under subsystem click on stop lamps. Look at any place there is a splice . an check for B+ voltage .


0helpful
1answer

I'm having trouble with my brake lights on my 07 Colorado both brake lights dont work the passenger side running light works but the driver side doesn't both turn signals work the high mount brake light...

There is a module on the passenger side behind the rear wheel mounted to the body. It goes bad. On the drivers side is where the grounds are located, on or close to the frame. Check these first.
0helpful
1answer

My brake lights dont come on what the pedle is apply but only the thrid light comes on when the four ways are on

I CHANGE MY BRAKE LIGHTS, THEY COME ON BUT THE PASSENGER SIDE DONT LITE UP WHEN I PRESS THE BRAKE,AND THE TURN SIGNAL DONT WORK ON THAT SIDE TOO.
0helpful
1answer

Brake lights gone, hazards and blinkers work. fuses are good

Replace the turn signal switch. The 2 lower brake lights run through this swith but the upper one does not. Let me know if you have any questions. Its not a hard oub if you are fairly mechanical. I expensive to have a dealer do. The part new is about $65.00.
0helpful
1answer

Brake lights

If all of the wiring, fuses, bulbs, and switches are good (which is what it seems since everything else works fine including the turn signals on the passenger taillight), sounds like it may just be a bad socket. I have a somewhat similar problem on a 1986 F150.
Not finding what you are looking for?

75 views

Ask a Question

Usually answered in minutes!

Top Mercury Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

15088 Answers

Arnie Burke
Arnie Burke

Level 3 Expert

7339 Answers

Are you a Mercury Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...