Where is the the Cylinder Head Temp sensor located on 2002 ford focus european made saloon/sedan?

SOURCE: Ford 460 Engine Temp sensor

looking at  the  front of  the engine, just to  the right and behind  the  distributor cap. You  will  see a  wire attached (push on).

SOURCE: 2001 focus/ect sensor

its screwed into the cylinder head ,when you fit a new 1 dont overtighten it they sense temp of the head they dont screw into the water jacket!!!!!!!!!!!!!!!!!!!!

SOURCE: cant find 2002 ford focus speed sensor

I had a 2001 and the transmission was not shifting correctly that was diagnosed as a speed sensor issue.

There is a speed sensor on the transmission, near the rear.

And there is a speed sensor on one of the front wheel hubs...

Tell me what the problem is?

SOURCE: location of CHT sensor

It is located at the back of the passenger side cylinder head close to where the intake manifold and head meet.It will have a YE/LG and GY/RD wires to it.

SOURCE: need cylinder head gasket torque specs.

looks like there is special sequence to reassemble and tightening, a quick note replace any bolts that have two punch marks.tighten as follows: x x x x x 10 4 2 6 8 x x x x x 7 5 1 3 9 torque all down to 15 ft lbs torque to 30 ft lbs plus 90 degrees. Good luck!