How to remove alternator on 2003 PT cruiser - 2003 Chrysler PT Cruiser

SOURCE: Replacing Alternator For 2001 Chrysler PT Cruiser (Manual)

this instruction is general for all vehicles. i am sorry that i do not have particularly for your 2001 chrysler PT cruiser.

first, identify the alternator.
remove the fan belt on the alternator,
label and remove all wires that is attached to it.
remove all bolts that is holding it.
remove the old alternator.

do the reverse on installing it.

tnx 4 using fixya,

drcool

SOURCE: 2004 chrysler pt cruiser starter motor removal

You may sneak it out with small fingers with out pulling out the starter.

If starter removal is required,Just unhook the battery cables,Remove the 2 bolts holding the starter on.


Please rate this a fixya

SOURCE: I have a 2001 PT Cruiser. The battery light came

Is it a remanufactured alternator. It sounds like you either got a faulty alternator or a wire is hooked up incorectly to it. I would test the voltage on the new one to make sure it wasnt a lemon If you are sure the wires are hooked up correctly.

rtpflh

• 546 Answers
• Posted on Sep 23, 2009

SOURCE: remove/replace alternator chrysler 2004 PT Cruiser

you may have to raise vehicle,remove wheel & plastic inner fender & take it out through the wheel well.it can still be like a chinese puzzle.

SOURCE: Ongoing P0441 purge code on 2003 PT Cruiser GT. I

if you have replace the purge solenoid the problem is either the vaccum supply hose is loosing vaccum or the purge side is hose is either blocked or cracked.