Question about 1993 Volvo 940

Open Question

Finding inercia switch in 1993 volvo 940 turbo

Posted by on

Ad

6 Suggested Answers

6ya6ya

6ya staff

  • 2 Answers

SOURCE:

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Ad

Anonymous

SOURCE: What is the firing order of a 1993 Volvo 940 2.0 Turbo GLE please??

1342

Posted on Sep 08, 2008

Ad

Anonymous

  • 2 Answers

SOURCE: 1993 Volvo 940 gle - speedometer not working

about 240.00 according to the volvo dr. ,fountain vally ,ca. An elect. part behind the speedo. is the problem . My 91 940 speedo stops working at 45 mph. thats what they told me. good luck,pete.

Posted on Jan 07, 2009

Anonymous

  • 1 Answer

SOURCE: Need radio code for a 1993 Volvo 940 GL

there are other forums type volvo radio unlock into the search engine. One way has to do with emergency 6666 code. You can get the radio to come on for 5 mins. At least you can then know that you have a working radio and not a dead one. Used car owners frequently think it is a dead radio and pay to get it replaced!! Yes, you must prove ownership at the volvo dealer, but you can get the info for free (if they are good guys).

Posted on Feb 20, 2009

Anonymous

  • 80 Answers

SOURCE: volvo 940 turbo oil control valve location

take off pipe going to the intercooler from the turbo see if oil is found and clean then other pipe from incooler check it .if oil is found .drain oil in intercooler .you have an oil leak from the turbo this is why you will have light on far left of dash

Posted on Apr 28, 2009

reisdos

Sean Reisdorf

  • 1297 Answers

SOURCE: I need brake light troubleshooting tips for 1993 940 Volvo turbo

the BOO switch, (Brake On Off) located on or near the brake pedal

Posted on Apr 29, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

1993 volvo 940 turbo wagon bulb monitor light up


bulb failure warning relay has failed.behind your front ashtray last relay on the left .round one change it try on ebay.

Sep 19, 2013 | 1994 Volvo 940

1 Answer

Replacing a starter on a 1993 volvo 940 turbo. Is this a difficult task?


It looks easy for the 940 but I am not sure about the 940 turbo, as maybe some of the turbo parts are in the way. I'm not sure about that, since there is no documentation on the turbo model vs. the 940 standard model. If you can follow the following instructions, then I would give it a whirl.

REMOVAL & INSTALLATION - 1993 Volvo 940
  1. Disconnect the negative battery cable at the battery.
  2. Disconnect the leads from the starter motor.
  3. Remove the starter motor retaining bolts.
  4. Remove the starter motor from the vehicle. To install:
  5. Position the starter motor to the flywheel housing.
  6. Apply locking compound to the bolt threads and install the retaining bolts finger-tight.
  7. Tighten the bolts to approximately 25 ft. lbs. (34 Nm).
  8. Connect the starter motor leads and the negative battery cable. Fig. 1: Unfasten the nut retaining the starter cables . . . 90952p12.jpg
    Fig. 2: . . . and remove the starter cables 90952p14.jpg
    Fig. 3: Unfasten the starter retaining bolts . . . 90952p11.jpg
    Fig. 4: . . . and remove the starter from the engine 90952p15.jpg
prev.gif next.gif

Oct 28, 2010 | 1993 Volvo 940

1 Answer

I need brake light troubleshooting tips for 1993 940 Volvo turbo


the BOO switch, (Brake On Off) located on or near the brake pedal

Apr 29, 2010 | 1993 Volvo 940

1 Answer

Engine tursn off at stop lights


try cleaning and adjusting the throttle if that doesnt help it may need a throttle switch

Jul 23, 2009 | 1994 Volvo 940

1 Answer

1993 940 volvo turbo cruisecontrol does)t work ?


I had a issue with my cruse control. Look under the hood. The the wire to the diaphragm for the crues might have popped off the throttle pully!

Mar 14, 2009 | 1994 Volvo 940

1 Answer

Code 1-1-3 volvo 940 turbo


The code seems to point to the camshft actuator circuit. Namely the Oil Control Valve. Probably needs replacement. I do not know the location on your vehicle. I suggest you ask a mechanic or try to find it online.

Feb 28, 2009 | 1992 Volvo 940

1 Answer

93 Volvo 940 turbo can't find bulb failure sensor


Sometimes the fuse looks good,but replace it anyway,that sensor in under your dash,its red and round.

Feb 04, 2009 | 1993 Volvo 940

1 Answer

What service is required for a 1993 Volvo 940 Turbo


Best bet is to talk with the local Volvo service manager..or a skilled mechanic. Normally, I don't think any real service is needed,unless there is a problem. Changing oil every 3K is good..not racing the car (turbo) just as you start up or shut it down is helpful too.

Dec 17, 2008 | 1993 Volvo 940

2 Answers

Volvo 940 se turbo estate


on the engine drivers side below the air intake/below the brake fluid reservoir/ follow the large red batery cable

Jun 14, 2008 | 1993 Volvo 940

Not finding what you are looking for?
1993 Volvo 940 Logo

Related Topics:

24 people viewed this question

Ask a Question

Usually answered in minutes!

Top Volvo Experts

Marvin
Marvin

Level 3 Expert

85216 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22485 Answers

Jonah Oneal

Level 3 Expert

14092 Answers

Are you a Volvo Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...