How to replace cam shaft sensor on a 99 ford escort. Where's it located

SOURCE: truck stalls

have you replace the crank sensor? or cranshaft sensor?
if not do it, but before you do that make sure to have the truck inspect for a posible aftermarket alarm installed if it does have it remove and drive it for a few days,
and please after trying leave ranking or feedback for me, thanx and good luck

SOURCE: location of timing pin plug 99 ford escort zx2 2.0 dohc

A p1383 code stands for (Variable cam timing over retarded Bank 1) Hope this helps.

SOURCE: ford F250 6.0 litre turbo diesel won't start.

check the fuel cut-off switch under the glove box.

SOURCE: 2002 ford escort zx2 camshaft sensor fit a 99 zx2?

Yes, All the years of the ZX2 utilize the same engine. 1998-2003 are all the same except for ECU programing and the MAF wiring. You should not have a problem.

SOURCE: how to install a coolant temp sensor in a 1995 ford escort

The coolant temperature switch and fan control switch are located sie by side, mounted in the steel portion of the heater hose that runs from the thermostat housing to the firewall, it is underneath the air intake tube and the ignition coil pack, mounted to the back of the cylinder head. Either drain out some coolant or be very quick, and you can unplug and unscrew each switch from the hose and replace it with a new one. Make sure the engine is cold. After replacing make sure to check the coolant level add as neccessary. The single wire connector switch is for the guage, and the other is for fan control. Hope this helps, let me know.