03 nissan altima wipers wont cut off ,i have replaced IPDM,BCM AND WIPER MOTOR

Phil Lovisek

• 726 Answers
• Posted on Dec 01, 2008

SOURCE: 2005 Nissan Murano - wiper arm

Check the nut, that holds the wiper arm on. It may be loose. Tighten nut and recheck. Let me know what you find.

SOURCE: How to change wiper blades on 2007 Nissan Altima

Most wiper blades are replaced the same way as on this video. I have a 2006 Altima and it is.

Make sure you have the correct size wipers. You have 2 different sizes (lengths) so use the manual where you buy them and get the right ones.

Thanks for using Fixya.

SOURCE: How do I access the windshield wiper assembly?

You have to remove the wiper arms by prying off the black platic piece over the nut. Remove the nut and the wiper arms. There should be 5 places on the black plastic piece that runs the length of the windshield. Remove 4 of them by prying them out. The one is the middle is a screw. Pull away the plastic piece and you should have access to the mechanism below. I think you need to replace the linkage if it has fallen off.

SOURCE: trying to find out the fuse for windshield wipers

where is fuse located for windshield wipers on 2004 altima?

SOURCE: MY NISSAN MURANO ..The windshield

there is a clip that holds the arms in place and it slipt off track dealer sugests that u buy the part, the complet asembly costs about 140 dollars. u can take the cowl apart and slip it back on but i will slip off again and, and all because a stuped plastic cllip that they dont sell separete. hope this help...