2002 Chevrolet Impala Logo

Related Topics:

How to change bulb in 2002 chevy impala above the rear back doors

5 Related Answers

Anonymous

  • 13 Answers
  • Posted on Jul 30, 2008

SOURCE: Thermostat on 2002 Chevy Impala

the best thing to get is the Haynes manual for your car at advanced auto or autozone or somewhere like that and the book will tell you how to take everything apart and put it back. i think the manual is about $16.00

Ad
A

Anonymous

  • Posted on Oct 08, 2008

SOURCE: 2002 chevy impala

I have a 2002 Impala and to reset my change engine oil light I turn the ignition on to setting right before actually starting the car and I press my gas all the way down three times within 5 seconds and that usally turns it off. Usually it works

Anonymous

  • 1 Answer
  • Posted on Dec 15, 2008

SOURCE: door handle broken (rear left)

broken right rear door handle on 2002 chev impala

Anonymous

  • 2 Answers
  • Posted on Feb 27, 2009

SOURCE: 2002 chevy impala o2 location?

it is locared on the driver side on top of the transmision

Anonymous

  • 1 Answer
  • Posted on Aug 09, 2009

SOURCE: 2002 Chevy Blazer, rear brake lights do not work

I had a similar problem and when i went to the auto electric place the guy said its a brake switch next to the brake pedal which is not working. He took it out and fixed it. Now its all fine.

Ad

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

0helpful
1answer

How do you change the lights above the doors on the 2004 chevy impala

Look at the lens. You will see a small slot on one side of it. Use a small screwdriver or key to pop it off. Pull the light out and snap the lens back in place. Bulbs are usually a number 194.
3helpful
2answers

2007 chevy impala brake light and left turn signal not working

Fast flashing dash signals mean there is a bulb issue-DEFINATELY!
10helpful
1answer

Back driver door won't lock or unloc without manualy doing . 2008 chevy impala

Hello, this is caused by a bad door lock actuator. the door lock actuator is part of the door latch. the door latch will need to be replaced to correct this problem.

  • Remove the rear door outside handle. .
  • Remove the interior trim panel.
  • Remove the water deflector


  • mrtechwrench_23.gif
    0helpful
    1answer

    How to install front turn signal 2004 Chevy Impala

    Once you open your hood look on the back of the headlight assembly. Twist the connector on the back of the turn signal and the bulb will come out. Then just replace with the correct bulb twist it back in and then test the blinker.
    0helpful
    2answers

    Brake lights not working on 2003 E 350

    Have you checked the fuse for the brake lights and have you checked the brake light switch.
    The brake light switch is directly above your foot when it is placed on the brake pedal.
    1helpful
    1answer
    0helpful
    1answer

    Replace the single light bulb on my 2001 Chevy Impala front righ

    remove the white slide on hedlight assembly and light will come out and you can change bulb
    0helpful
    1answer

    2003 chevy impala

    Have you checked the back bulb(s)? If so it must be a door switch problem, check if power is reaching the lights and if not do you have power at the door switch if you do its the door switch if not its a fuse. This should Fixya.



    Please remember to rate this solution.
    5helpful
    4answers

    Door handle broken (rear left)

    broken right rear door handle on 2002 chev impala
    Not finding what you are looking for?

    245 views

    Ask a Question

    Usually answered in minutes!

    Top Chevrolet Experts

    ZJ Limited
    ZJ Limited

    Level 3 Expert

    17989 Answers

    john h

    Level 3 Expert

    29494 Answers

    Thomas Perkins
    Thomas Perkins

    Level 3 Expert

    15088 Answers

    Are you a Chevrolet Expert? Answer questions, earn points and help others

    Answer questions

    Manuals & User Guides

    Loading...