SOURCE: 63 cadillac sedan deville heater core removal and installation instructions
I do think you have to pull he dash, for that you will need a manusl, try ebay for used factory manuals, I have had good luck getting them there for all my cars.
SOURCE: neutral switch 1993 cadillac
The neutral safety switch is on the top of the automatic transaxle (under the hood). You have to remove the air cleaner assembly for access to this item. Once the air cleaner is off, you can see the switch mounted on top of the transaxle.
Remove the shift linkage, electrical connectors and vacuum hose as needed.
Remove fuel line bracket if needed.
Remove mounting bolts and nuts to remove the old switch.
Install new switch as reverse of above.
Put shift lever in neutral.
Align switch so it's alignment hole and the matching tang hole line up. Tighten down the switch mounting bolts. Verify that the engine starts in PARK and NEUTRAL. Re-adjust if it doesn't.
Charlie
SOURCE: STOP ENGINE-LOW OIL PRESSURE LIGHT COMES ON AFTER INSTALLING NEW
Before making any repairs I suggest you put an external mechanical oil pressure gauge in place of the sending unit and determine what your actual oil pressure is. That will tell you which way to go using real numbers. If this condition appeared suddenly it may not be a large problem, especially as you did not note any knocking etc that goes along with internal wear.
SOURCE: 2001 Cadillac Deville TCC PWM Solenoid Circuit (p1860)
it should take approximately 4 - 5 hours plus the cost of sensor
SOURCE: replacement sequence for serpentine belt for a 96 cadillac devill
Assuming you have the Northstar engine
245 views
Usually answered in minutes!
×