LAMPS/LIGHTING - EXTERIOR PT
HEADLAMP LEVELING MOTOR - EXPORT
REMOVAL
(1) Remove headlamp unit
(2) Disconnect headlamp levelling motor electrical
connector.
(3) Rotate levelling motor one quarter turn counter clockwise.
This will free levelling motor housing from
the headlamp unit.
(4) Pull levelling motor straight from headlamp
unit. Significant force will be required to unsnap
motor control arm from lens reflector.
NOTE: The headlamp levelling motor control arm is
snapped into the lens reflector mechanism very
securely. Use a firm, steady pull to disengage motor
arm from reflector.
(5) Remove levelling motor from headlamp unit.
INSTALLATION
(1) While holding headlamp reflector assembly
still, push levelling motor until control arm is fully
seated into reflector mechanism. An audible "snap"
will be heard.
(2) Push and rotate levelling motor one quarter
turn clockwise to lock motor to the headlamp unit.
(3) Connect headlamp levelling motor electrical
connector.
(4) Install headlamp unit in the vehicle
Locksmith Buffalo Ny 24 Hour Locksmith in Buffalo Ny 716 249 2944
×