At Fixya.com, our trusted experts are meticulously vetted and possess extensive experience in their respective fields. Backed by a community of knowledgeable professionals, our platform ensures that the solutions provided are thoroughly researched and validated.
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
If the temperature gauge in your 2001 Ford E150 cargo van is not working, there are a few potential causes:
Faulty temperature sensor: The temperature gauge in your van is controlled by a temperature sensor, which sends a signal to the gauge to display the engine's temperature. If the sensor is faulty or has failed, the gauge may not display the correct temperature or may not work at all.
Wiring issues: If the wiring that connects the temperature sensor to the gauge is damaged or broken, the gauge may not display the engine's temperature correctly. Check the wiring for any damage or loose connections.
Blown fuse: The temperature gauge is powered by a fuse, which can blow and cause the gauge to stop working. Check the fuse box for any blown fuses and replace them if necessary.
Instrument cluster issues: If the temperature gauge is not the only gauge that is not working, the problem may be with the instrument cluster itself. In this case, the instrument cluster may need to be repaired or replaced.
Faulty gauge: It's also possible that the temperature gauge itself is faulty and needs to be replaced.
There are three fuse that can effect the break light from working on your 2008 , start with checking the F39 fuse as well as the F7 and F11 all located in the interior fuse panel. in the box above the brake pedal
Hello Brenda...you will find some identifying information on the actual real axle casing. Stamped numbers, I.D. tag or you can search your VIN (Vehicle Identification Number) or make, model year and series on the internet to see what options were available for rear end gearing ratio's.
Yes you should stick with a similar or identical rear end to ensure proper mounting bracket alignment and gear ratio choices. Dana Model 60, 70 & 80 Axles are not internally identical.
Looks like the standard differential carrier for the E150 is a 8.8" (*10 bolt). Standard, Includes Spider gears, 31 spline, 7/8" shaft.
* Ten Bolt - The rear end cover plate contains 10 mounting plate bolt holes.
The TPS is located on the opposite side of the throttle cable on the throttle body. If you don't know what the throttle cables are, get a friend to sit in the van and push the gas pedal down until you see something moving. it will be on the opposite side of the movement
×