Looking for a vaccuum hose diagram 2002 dodge stratuss

should be under your hood on the edge where the radiator is there is a few diagrams there timing settings vacume hoses etc if they are gone just use your search engine on images intesd of web it will pop right up

i am sending the diagram

what engine??

Check the next image...



Fig. 49: Vacuum hose routing-1993-95 3.3L and 3.8L engines

The PO305 is a cylinder misfire on #5

You don't need a diagram to repair a vacuum
leak so loud it whistles

This is either a slipping belt, or, you have a vaccuum leak, check your vaccuum hoses for splits and perished ends, you can use a can of WD40 to squirt on the ends of the hoses to see if it changes note or dissipates. mechanics should charge you to have a look, shop around and good luck

its attached to your intake ...it will look like a minature brake booster a small diaphram with vaccuum hoses attached ... if you get it off blow out the opening they get clogged from using 87 oct
check your vaccuum pressure as well ...rule of thumb you need 11-14 psi

Greetings!

Provided the hood was never changed, the MFR pasted a decal on the underside of the hood.

in lieu of a MFR decal, check here... http://www.allpar.com/fix/miscpix/hoserouting.gif

Cheers, Jay

It is very likely that the vacuum hoses are the problem. The only people that have a manual with the diagram you need is a dodge dealer, contact the service dept at your local dealer and they will probably photo copy you a diagram from the service manual.

I got the printout for my 2K carb at my nearest Toyota dealer for free...;)