At Fixya.com, our trusted experts are meticulously vetted and possess extensive experience in their respective fields. Backed by a community of knowledgeable professionals, our platform ensures that the solutions provided are thoroughly researched and validated.
Re: Where is the thermostat located on a 2010 cheverolet...
Follow the upper radiator hose to the engine, at the engine end of the hose where it connects to a large hose nipple, remove the hose and unbolt the cover, the T-stat is under that nipple cover.
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
The thermostat on a 2010 Chevy Camaro RS V6 is located on the front of the engine, near the top. It is a small, round component with a plastic housing and a rubber seal. To access the thermostat, you will need to remove the thermostat housing, which is located on the front of the engine, near the top. The thermostat housing is typically held in place by several bolts, which can be removed with a wrench or socket. Once the housing is removed, you will be able to access the thermostat and remove or replace it as needed. I hope this helps!
www.carcomplaints.com/Chevrolet/Impala/2010/ The 2010 Chevrolet Impala has 60 problems & defects reported by Impala owners. ...July 11: GM Recalls 98,000 Cars For Radio and Seat Belt Problems · July .
What is a vehicle RPO code?
A Regular Production Option (RPO) is a General Motors standard coding for vehicle configuration options. These codes are a combination of 3 alphanumeric characters and refer to a specific option or modification to the vehicle.
Engine Coolant Thermostat Replacement (RPOs LZE/LZ4/LZ9)
Sticker on door jam .
It may need a thermostat but first always do the obvious make sure that the reserve tank for the antifreeze is 3/4 full, low antifreeze can cause a loss of heat. First check that then do the thermostat. Be sure to bleed out the air from the system look for the bleeder screw it is located at the highest spot on the systems connections usually at the upper hoses housing, unscrew to bleed after the motor has warmed up while running.
×