BMW SHOWN EML LIGHT ON CLUSTER AND COULDN'T PICKUP,THE PEDAL SENSOR WAS REPLACED AND THE EML LIGHT WENT OFF BUT STILL IT CAN'T PICKUP WHEN THE ACCELERATOR PEDAL IS PRESSED. WHAT CAN THE PROBLEM BE

its called a limb mode. until you fix the problem it will not go away.

May need a transfer case neutral indicator.

"EML" is BMW's system name for electronic throttle management. The "EML" system, in it's most basic sense consists of an accelerator pedal (with an electronic position sensor), a computer module (usu. integrated with the main engine computer), and an EDK (Elektronische Drosselklappe or Electronic throttle valve). The EDK is also known as a "drive by wire" throttle. "EDK" throttles use a computer controlled stepper motor rather than a purely mechanical linkage (usu. metal cable attached directly to the accelerator pedal) to control the opening and closing of the throttle plate.

EML means drive by wire throttle control system.Its a drive by wire not a mechanical linkage, A fault has been detected,in the throttle accelerator pedal position ot the TAC valve assemble.

The "EML" warning light in a BMW indicates a problem with the "drive by wire" throttle control system."

"EML" is an acronym for "Elektronische Motorleistungsregelung". Loosely translated from the original German for the BMW owner means Electrionic Engine Power Control.

"EML" is BMW's system name for electronic throttle management. The "EML" system, in it's most basic sense consists of an accelerator pedal (with an electronic position sensor), a computer module (usu. integrated with the main engine computer), and an EDK (Elektronische Drosselklappe or Electronic throttle valve). The EDK is also known as a "drive by wire" throttle. "EDK" throttles use a computer controlled stepper motor rather than a purely mechanical linkage (usu. metal cable attached directly to the accelerator pedal) to control the opening and closing of the throttle plate.

"Drive by wire" throttles are very common on modern vehicles starting in the late nineties up through the present day. "Drive by wire" technology enables very precise throttle control to improve drivability and vehicle emissions, as well as many convenience features like electronic cruise control, traction control & stability control.

BMW first implemented "drive by wire" in very limited quantities on the most expensive & sophistocated BMW models starting in 1988.

The latest generation of advanced vehicle features to take advandage of "drive by wire" technology are radar guided cruise control, accident avoidance control, autonomous-driving, and autonomous-parking systems.


Read more: http://wiki.answers.com/Q/What_does_eml_warning_light_on_a_bmw_mean#ixzz1OnBNssKH

EML means that your cars computer(ecu) has detected a fault from a sensor on your engine.You need to have your car diagnosed to determine what fault code it is and then you will be able to solve the problem

what is an Eml light? The traction control light is a common one, but Eml, never heard of that one.

328 e46 eml light came on now wont start can anyone help please

Check the ABS brake sensors in your wheels, if they are not functioning properly. It will trigger the computer to engage the ASC auto stability control light as the asc uses the brakes to assist in control. I will also engage the EML engine management light to slow the rev point to limp mode

Engine Management Light, same as a Check Engine Light... simply means a sensor component on your vehicle is malfunctioning You'll need to have someone with a tester to run diagnostics and retrieve codes to find exactly what the culprit is. Don't be surprised if it's the Throttle Positioning Sensor (TPS), common problem on BMWs