old post.
which engine, 8valve TBI or 16v MPI?
but works on all cars with , 1 more step.
1: pull battery neg. lug, first, or boom, eat acid/go blind, etc.
2: remove evap canister front of the intake MAN.
3: remove alternator ,makes this super easy,
4: see brace under the intake MAN, remove that
5: unbolt starter. after removing its wires.
just 5 steps.
step 4 is UNIQUE to THIS CAR.
here is the starter , exposed.
http://www.fixkick.com/engine/97-motor-pull/HTML/image_50.html
the 16v brace is see here part id #35
http://www.fixkick.com/sensors/ECT-loc.JPG
8v
brace 28
http://www.fixkick.com/sensors/EGR/8v_only/8v-egr1.jpg
if that dont work find an 8yr kid to wiggle arms in to this small space.
×