Left works correctly right goes on continuesly but lite doesn't go on
SOURCE: Oil lite came on right after oil pan gasket
Hi. This issue has several causes, but the oil light indicator is a strong sign of low pressure in the engine. This will cause the engine lubrication rate to drop, thus, producing a illuminated oil light, and erratic Oil pressure readings. The necessary actions are to have a manual oil pressure test ran on this engine, asap. When running a manual oil pressure test, you will discover if the true oil pressure is low, or normal. If the test proves that the oil pressure is, indeed, low, this will confirm that the Oil pump is suspect.
Now, if the true readings given during the manual oil pressure test are indicating that the pressure is normal, this will be the result of a failed sending unit(oil pressure switch).
SOURCE: Oil lite came on right after oil pan gasket
Be SURE the SENSORS OIL PRESSURE and if APPLICABLE OIL LEVEL SENSOR Are Good and TEST OIL PRESSURE MANUALY These Procedures WILL Locate the Problem
SOURCE: RIGHT TURN SIGNAL ONLY, WILL NOT FLASH. lEFT AND
your flasher is bad. Even though all 4 hazards flash,it is still bad.
SOURCE: My turn signals did not work - left or right.
OK, did you try changing the flasher under the dash on the driver's side?
SOURCE: I have 95 olds cutlass sup. 3.1L Turn right the
most likely its your muti-funtion switch in the steering column.but first check your turn signal flasher & your emergency flasher
Testimonial: "It's looks like multi-function switch because all bulbs and fuse are look okay. I don't know how to replace the switch thus i have to go the shop. "
75 views
Usually answered in minutes!
×