2008 Toyota Tacoma 2.7 makes noise when low rpm just put a new belt on it and it still didn't solve the problem.

SOURCE: Reset the Low Pressure Tire Indicator Light

If you have the silver-metal valve cores, on the rims, there is NO reset proceedure. Under the valve cores is a transmitter, which is battery powered. It sends a "yes/no" signal to the tire pressure ECM. Note that ALL 5 tires transmit to the ECM. The signal is "at or above" the specific target pressure needed, or is is below the target pressure. What to do: get a GOOD tire pressure gauge, not those cheap ones that look like pencils. Set the tire pressures to the specification, INCLUDING the spare. Your light should go out. If not, there is the possibility that one of the sensors is innoperative, and that will involve a trip to the dealership, to get it replaced under warranty. Try the tire pressure resetting, adn don't forget the spare. Get back to me if this works. Glad to help, and thanks for choosing FixYA.

SOURCE: 2008 Toyota Tacoma Excessive brake pedal

Your dealer is not lying to you.
All of the Toyota product line with ABS has this phenomenon. What Toyota has done is incorporate "Brake Force Distribution" into the braking system. What that means is there is now a sensor on the brake pedal/brake rod, going to the master cylinder. The sensor measures how FAST you press on the brake pedal. This activates the ABS pump, and supplies more brake fluid, harder, to reduce the time needed, such as a "panic stop"; the pedal travel is much longer than you are used to, because of the way they have to measure the speed of the rod being depressed. In actuality, this system is much better than the old system, as it also prevents wheel drag. It just takes a while to get used to. Really, there is nothing to worry about, I explain this same thing to my customers every week.

I hope this helps you out.

Thanks for choosing FixYa for assistance.

SOURCE: procedure to change serpentine belt 2006 toyota tacoma?

On my 2005 Tacoma with the 4.0L V6, I found it easier to change the belt from under the truck. Just remove the skid pan. Plenty of room to install the belt. The tensioner pulley is the one at about 2-o'clock from the crankshaft with the belt nearly all the way around it.

SOURCE: 2001 Toyota Corolla lifter noise

Check your timing or could be timing belt out of 1 tooth. This model of corolla does not use lifter.

SOURCE: can't find transmission dipstick on 2008 toyota tacoma

there is no dipstick it's a sealed unit dealer only.sorry a lot of vehicle manufacturers have went to this sealed style some ford suv's,tacomas,dodge chargers challengers and magnums.just a few off tof of my head.it's one of those BETTER DESIGNS THEY ARE ALWAYS COMING UP WITH TO MAKE YOU BURN UP A 5000 DOLLAR UNIT IN HOPES OF SELLING ANOTHER TRUCK TO REPLACE THE ONE THATS TORN UP.....SORRY oh ya the transfer case has a regular old check plug 28 mm i think don't quote me could be a 30 or 32 also they changed up on those.