SOURCE: 1999 chevy suburban misfire
could be one of several things
1) run a compression check, if it low on that cyl then you have a blown head gasket or burnt valve
2) could be the enjector
SOURCE: how to replace an ignition cylinder lock
Hi,
1) Disconnect and isolate Negative (Ground) battery terminal
2) Wait full 2mins for Airbag system capacitors to discharge (must disable airbag before working near steering column)
3) Insert key and turn to ON position (not start)
4) Release & remove cylinder barrel by pressing the release with a suitable tool (access through hole in the lower shroud)
5) Withdraw cylinder barrel from shroud and disconnect wiring loom from cylinder.
Installation of new barrel is the reverse of above.
NB: YOU MUST ALWAYS DISABLE THE AIRBAG FIRST !
Hope this helps...
Cheers,
SOURCE: how do i replace ignition cylinder in volvo 2002
The link below is not for your exact model, but may be of help:
http://volvospeed.com/Repair/ignition_S80.html
67 views
Usually answered in minutes!
×