SOURCE: 1997 GMC Sierra Truck Ignition Switch
its a long process,you need a steering wheel puller, once its off take the hazard button assembly out, take the turn signal loose, pull old ignition out, carefully install new one, and reverse procedure and always if u get confused i would highly recomend
a chiltons manual they explain things great
SOURCE: 1997 GMC Sierra Ignition Switch Replacement
take off the cover on the top and bottom of the steering column just behind the wheel. pop the tilt lever out simply just by grabbing it and give it a good tug. then once you have the new switch and you get in there your going to need an inverted torx socket to remove the small bolts that hold the switch to the column. do not move the gear on the new switch make sure it lines up exactly as the old one did!!!!!!!!!!!!
SOURCE: how to replace an ignition lock switch on a 98 gmc sierra
Disconnect the battery on the truck.
SOURCE: my 92 gmc sierra ran
Happens all the time with 70's 80's and 90's GMC trucks. Replace the control module in the distributor cap.
SOURCE: how do i change the ignition key switch in my 1988
if your key won't work ,the steering wheel has to come off to replace key switch - special tools needed - if the problem is engine not starting or cranking over - the electric switch the key rod goes down to is on the bottom of the steering column above brake pedal
467 views
Usually answered in minutes!
×