Could be other bad pulleys. Look at the belt inline with the pulleys. If one is bad, you will see it misaligned. With the belt off the pulleys should have very little to no play and should turn by hand smoothly.
SOURCE: 03 buick rendezvou window problems window falls down in door
The part numbers for the two plastic clips are ;;15286776 and 15286777.
Ian
SOURCE: need to install serpentine belt on 2001 Buick Lesabre
There a few different layouts for that car year and model so here is a link and you will find what you need .. Thanks for using FixYa and please rate me a FixYa .. Crayz
Look for the 1/2" square hole on the tensioner. That hole is were you place a 1/2" breaker bar, to relieve the tension, by pulling on the bar.
SOURCE: Replace belt tensioner pulley on 1994 buick skylark
You need to put a piece of wood underneath the oil pan and place a jack underneath the oil pan/motor, loosen the motor mounts that are next to the belts, then raise the motor enough to reveal the nuts/bolts for pulley...just dont raise the oil pan so high that you crush it or break something, only enough to be able to reach tension pulley...
SOURCE: motor mounts and pulley tensioner
I was wondering how do you take off the front transmission mount on a 1997 buick park avenue
70 views
Usually answered in minutes!
×