Question about 2003 Dodge Grand Caravan

Open Question

I have a 03 dodge grand caravan wont turn off when in off postion key removed

Engine,seatbelt,oil,od &trip light,radio power windows on with no key once started wont turn off. off postion key out still running

Posted by on

Ad

6 Suggested Answers

6ya6ya

6ya staff

  • 2 Answers

SOURCE:

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Ad

hosea malika

  • 80 Answers

SOURCE: wiring diagram

try alldata .com

Posted on Aug 04, 2008

Ad
emissionwiz

Marvin

  • 85219 Answers

SOURCE: Battery replaced on 2001 grand dodge caravan now radio dont work

U will need to enter the radio anti theft code, this lock out was triggered by the loss of voltage to the radio during the battery change, this code is unique to each radio and cam in the owners information packet when the cat was sold new.

Posted on Apr 13, 2009

Robert Debison

  • 412 Answers

SOURCE: no power to windows, wipers, radio and heater when i start my van

it sounds like you have faulty ignition switch

Posted on May 21, 2009

jakeburningh

  • 2 Answers

SOURCE: NEEED FUSE FUSE BOX LAYOUT FOR 2003 DODGE GRAND CARAVAN

You can get free owners manuals online at:

http://www.edmunds.com/ownership/howto/articles/120189/article.html

or just type "owners manuals" in your search.

Here is a post I found that worked for my 2005 caravan.

For a 2001 Dodge Caravan: The owner's manual is vague, only stating that all fuses are under the hood in the fuse box, no diagrams. Once you have removed the fusebox cover, the diagrams for what each fuse does is provided under the lid. UNCLEARLY marked is the radio fuse, a 20amp fuse located 2nd row from top to the right of the accessory relay. It is marked: RDO/IP IGN.

Jake

Posted on Sep 19, 2009

app_3rp12932

app_3rp12932

  • 1 Answer

SOURCE: Dodge radio starts then shuts off

Same issue in a 2002 Dodge Ram. Can anyone explain the problem and solution with more detail?

Posted on Mar 03, 2012

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

Why the light about change oil is blinking in the meter


U have 2 take it back 2 whomever changed the oil so the warning light can b reset!

Aug 05, 2014 | 2006 Hummer H3

Tip

Chevrolet service light 1991-01


Camaro

1998-01

To reset the "OIL CHANGE" light, press and hold the "TRIP/OIL RESET" button on the instrument panel for 12 seconds. When the light flashes and then goes out, the system is reset.


Corvette


1997-01

To reset the monitor after an oil change, turn the ignition on. Press the "TRIP" button so that the "OIL LIFE" percentage is displayed. Press "RESET" and hold it for two seconds. The word "RESET" should appear on the monitor, then "OIL LIFE 90%".


Impala,
Monte Carlo


2000-01

Turn the ignition to ON without starting the engine. Fully press and release the accelerator three times within five seconds. If the CHG OIL SOON lights two times, the system is resetting. Turn the key to OFF, then start the vehicle. If the CHG OIL SOON light comes back on, the system has not been reset, repeat the procedure. Follow this procedure to reset the GM Oil Life System using the DE 100 Series Radio. Turn the ignition to ACC or ON and the radio off. Press and hold the DISP button on the radio for at least five seconds until SETTINGS is displayed. Press the SEEK up or down arrow to scroll through the main menu. Scroll until OIL LIFE appears on the display. Press the PREV or NEXT button to enter the submenu. RESET will be displayed. Press the DISP button to reset. A chime will be heard to verify the new setting and DONE will be displayed for one second. Once the message has been reset, scroll until EXIT appears on the display. Press the DISP button to exit programming. A chime will be heard to exit programming. A chime will be heard to verify the exit.


Impala,
Caprice


1994

To reset the "CHANGE OIL" light, turn the ignition switch to the run position with the engine off. Access the reset button on the end of the instrument panel by the fuse block. Press the switch and hold it for at least 5 seconds.



Lumina,
Monte Carlo,
Impala,
Caprice


1996-00,
1996-99,
1995-96,
1995-96

To reset "CHANGE OIL" light, turn the ignition switch to the run position without starting the engine. Fully depress and release the accelerator pedal 3 times within 5 seconds. The light will flash and go out.


Corvette


1990-96

After an oil change, or when "CHANGE OIL" appears on the Trip Monitor, with the ignition on and engine off, press the "ENG MET" button (located on trip monitor) once. Press the "ENG MET" button again within 5 seconds. Within 5 seconds, press and hold the "RANGE" button (1990-1994) or "GAUGES" button (1995). The light will flash. When it stops flashing and goes out, the system is reset.


Chevrolet Suburban,
GMC Yukon XL,
Chevrolet Silverado,
GMC Trucks Sierra


2000-01,
1999-00

Turn the ignition key to the RUN position. Fully push and release the accelerator pedal 3 times within 5 seconds. If the CHANGE OIL SOON light flashes 2 times, the system is reset. However, if the light comes on and stays on for 5 seconds, the system did not reset. Repeat the procedure if the system does not reset.


Silverado, Sierra Trucks


1991-93

To reset the "CHANGE ENGINE OIL" message, turn the ignition key to the run position. Press and release the accelerator pedal three times within 5 seconds. If the light flashes for 5 seconds, the system is reset. Repeat procedure as needed.















on Dec 07, 2009 | Chevrolet Camaro Cars & Trucks

1 Answer

2004 olds alero 3400 eng.turn on key and all warning lights and gauges come up,then all goes off after 3 seconds,starter will not work,can start by jumping across starter and runs fine and shifts fine


Check for power at the switch wire when someone turns the key to start. I would say there is a break in the circuit of the thin wire between the starter & the ignition switch

Oct 03, 2012 | 2004 Oldsmobile Alero

1 Answer

How do i reset the service counter in my 2002 mercedes ml500


Turn the ignition key 2 clicks (postion II) and then quickly push trip button twice, you should see time or mileage remaining for service.hold trip button down and turn key off, keep trip button down do not release, with trip still down turn key back on to the II postion continue to hold button for about 10 sec,you will hear the dash beep and the display will read 10000,all set release trip and turn key off. let me know the outcome. good day

Feb 15, 2012 | Cars & Trucks

1 Answer

Where is the reset button to rest your change oil light?


{: ) There is a trip reset button on your cluster to reset the oil life.
Follow this procedure to reset the GM Oil Life System
  1. With the ignition key in RUN but the engine off, repeatedly push the trip/reset button until OIL is displayed on the driver information center (DIC).
  2. Once OIL is displayed, push and hold the trip/reset button for 5 seconds. The number will disappear and be replace by 100 indicating 100 percent oil life remaining.
  3. Turn the key to OFF.
  4. If the change engine oil message comes back on, the engine oil life monitor has not reset. Repeat the procedure.

wyet_helps_5.jpg

Jul 15, 2011 | 2002 Oldsmobile Silhouette

1 Answer

How to reset "maintenance required" warning light


To reset the maint light turn the key to postion 1 then push the trip button in and hold then turn key to postion 2 while still holding the button continue to hold the button light will flash and go out turn key off then start engine to see if it reset, note make sure the display is showing the mileage not the trip. good luck.

Jan 25, 2011 | 2007 Lexus GX

3 Answers

I have a 2001 saturn sc1 that is having intermittent starting problems. At times after its been driven ill go out to leave again and it won't start. No clicking when I try and start it either. Wait for...


I am having the same problem. did you figure out what was wrong with yours. I have tested all of the wires in the harness under the dash, they r fine. I pulled off the starter and had it tested; O'rilies said it was fine. It is a 5 speed, and I can push start the car just fine any time. Like yours, some days my car starts, some days it doesn't. The days it starts, it runs fine with no problems starting or running. the problem is the days that it wont start.

Feb 25, 2010 | 2001 Saturn S-Series

6 Answers

2009 TOYOTA VENZA MAINTENANCE REQUIRED LIGHT ON-WHY? CAR NEW W/ ONLY 9,000 MILES ON IT.


I finally found the solution. It is actually detailed in the owner's manual but you really have to hunt for it. Look at page 450/451.

Step 1: Switch the display to the trip meter A with the engine running.

Step 2: Turn the engine off (but don't turn the key all the way to where you can remove it from the ignition).

Step 3: While pressing the trip meter reset button, turn the key to IGNITION ON (but don't start the engine). Continue to press and hold the trip meter reset button until the trip meter displays "000000".


Jan 20, 2010 | 2009 Toyota Venza

2 Answers

2006 Town and Country, While driving the warning lights came on (air bag, oil presure, low fuel, check engine, etc...) Speedometer stopped working, fule gauge went to Empty (had just filled the tank 11...


1)check the ignition switch is not loose.those things normally come on before starting.unless2) you have a main ground broken somewhere.rodents eat the wiring harness to build a nest and cause mayhem...i have seen that a few times .check the fusebox under the hood on the drivers side

Jul 04, 2009 | 2005 Chrysler Town & Country

1 Answer

BMW528i 1999-How do you reset oil service light after oil change?


With the key in the ignition but in the off postion press and hold your odometer trip button in then turn your key to the first postion hold the trip button in for 5 seconds the display will read oil service or inspection then it will say reset release the button and then press it again untill the reset starts to flash then release and press the button briefly to reset

May 28, 2009 | 2008 BMW 528i Sedan

Not finding what you are looking for?
2003 Dodge Grand Caravan Logo

Related Topics:

41 people viewed this question

Ask a Question

Usually answered in minutes!

Top Dodge Experts

Marvin
Marvin

Level 3 Expert

85219 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22485 Answers

Jonah Oneal

Level 3 Expert

14092 Answers

Are you a Dodge Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...