SOURCE: Replacing dashboard lights on an 2000 Oldsmobile Silhouette Van?
the light bulbs are not replacable unless you can solder, you have to replace the complete instrument cluster, get one from a junk yard 100 bucks.
SOURCE: Front hub/bearing replacement
You will find that after you remove the hub, you will need to take it to someone with an engineering press to get the old one out and press the new one in.
Good luck
SOURCE: Need diagram of firing oreder for a 2000 olds
I can't upload the diagram but the firing order appears to be 1,4,6,3,2,5
Install the spark plug wire(s) (1, 3 and 5) to the engine right side
spark plug(s).
Install the spark plug wire(s) to the retaining clips.
Install the spark plug wire(s) (2, 4 and 6) to the engine left side
spark plug(s).
Install the spark plug wire(s) to the retaining clips.
You can get a copy of the service manual from Promanuals.net for cheap.
SOURCE: front wheel bearing assembly unit, what tools will
TOOLS YOU NEED IS 35 METRIC SOCKET FOR AXLE NUT.USE 6 POINT SOCKET.DONT USE 12 POINT SOCKET.COULD DAMAGE AXLE BOLT EDGES.MAKING IT HARD TO GET OFF.YOU NEED A TORQUE WRENCH WITH THE RANGE OF 200 FT LBS TORQUE.YOU NEED 1/2 BREAK BAR.AND A HUB PULLER.NOW TO LOOSEN AXLE NUT.BEST TO LEAVE TIRE ON WITH CAR WEIGHT ON GROUND TO LOOSEN THE AXLE.BECAUSE ITS GOT 192 FT LBS TORQUE.HARD TO LOOSEN WITH TIRE OFF.192 FT LBS TORQUE IS WHAT YOU TORQUE IT AT.BESURE TO READ INSTRUCTIONS TO NEW HUB BEARING ASSEMBLY. YOUR AXLE NUT TORQUE WILL BE DIFFERENT IF YOU GET A NEW GREY NUT.BECAUSE NUT STRENGHT WILL BE DIFFERENT.IF YOU GET A BLACK NUT WHICH IS HARDER STEEL TORQUE WILL BE 192 FT LBS.YOU NEED A 13 METRIC SWIVEL SOCKET TO GET HUB BEARING BOLTS OFF THEY WILL BE IMPOSSIBLE TO REACH WITH OUT IT.HUB BEARING BOLTS TORQUE IS 62 FT LBS
SOURCE: I need to replace a coil pack on my 2000 Olds
Rotate the engine? I really dont know what you are talking about. just unbolt it and bolt a new one on, the wires should be marked on the coil.
304 views
Usually answered in minutes!
×