Oil Pan Rusted and needs replaced
ok not to hard to replace you need to go to auto store and buy a new one. it may or may not come with new gaskett they can tell you what size you need if it dosent come with a new one. also you will need to drain the oil before removing the old pan so make sure to buy new oil for that.. your basicly doing an oil change so you may as well get new oil filter too. then after you have everything... new pan, oil, oil filter, gaskett.. just get under take out oil plugg drain oil in catch can. remove the oil pan bolts you may have too tap the oil pan in different directions to get it to drop off. clean away old gaskett if you need to, and replace new gaskett and oil pan, lay new gaskett ontop of new oil pan and hold in place to get a couple bolts started then start and tighten all bolts useing a cross bolt tightining pattern to make sure the pan is in place{ tighten one bolt then do opposit bolt} change oil filter, and refill with oil.. if you need to see this done youtube is an excillent place to find videos on this.. i hope this helps... remember to let the car cool before doing this so get everything you need and start the next day before you drive.. nothing worse that getting hot oil down you arm while your laying on the ground...
×