Do I have to remove the bolt from under the headliner to remove the rear window or can I just cut the window out to replace the top?
SOURCE: 2000 sebring convert front /rear motor mt replacement
I would suggest you go purchase a Haynes manual .. they are great for all the DIY things .. Here's a link
SOURCE: Remove and replace convertable top on a Chryster Sebring
albert I need to tell you this buddy you have saved some money on the top I would call a uphostry shop in your area they will pick up car and repalce the top for you and the window needs to be seemed in there for safety reasons call one up I hate to tell you that but. Your better off having a specailty company do this if you need anything go to collsionrepairadvice.com
SOURCE: 2000 chrysler sebring convertable top will go down but will not
Typically, when when this happens, the system is low on fluid and/or must be bled. Here are the procedures:
Lower the top to the full down position.
SOURCE: window off track driver side 1997 sebring
You'll need to remove screws that are by the door handle, arm rest, under door and side of door and then gently pull back on the panel as there will also be retaining clips attached and you don't want to break them. If needed, you can pull back the weather seal (can't reuse it, but it's not that important) and you will be able to access everything inside the door
305 views
Usually answered in minutes!
Unless you want to really mess things up leave this to a auto trim shop!
×