SOURCE: saturn sc1 starting
check coolant temp sensor located at driver side end of cyl head. remove sensor and check or cracks. also check connector for corrosion. if cracked, go to dealer for replacment. they eill sell you a new designed metal sensor to replace your cracked plastic one. dont buy aftermarket, they will not be accurate. cracked sensor will cause eng. to run rich. may start ok cold but not when hot.
SOURCE: bleed the clutch
No way to bleed the clutch system.You need to buy a clutch master/Slave assy from saturn.Comes completely full of fluid & ready to install.It has retainers to hold slave pin in place until fully installed.Once installed you push the pedal & you will hear a faint click which is the slave retainer breakaways relieving.No other way to bleed although aftermarket parts house will sell you individual pieces.hope this helps
SOURCE: where i download the owners manual 2002 an saturn sl2?
Go to this link and you will have to sign up but you will be able to download the owners manual for free: http://www.gm.com/gmownercenter/saturn/. Hope this is what you need. Thanks for rating my response and for using FixYa!
254 views
Usually answered in minutes!
×